{"id":262,"date":"2017-08-19T18:35:58","date_gmt":"2017-08-19T16:35:58","guid":{"rendered":"https:\/\/netbsd.name\/?p=262"},"modified":"2017-08-19T18:37:43","modified_gmt":"2017-08-19T16:37:43","slug":"netbsd-8-beta-testing","status":"publish","type":"post","link":"https:\/\/netbsd.name\/?p=262","title":{"rendered":"NetBSD 8 beta testing"},"content":{"rendered":"

I must admit I haven’t been using NetBSD for any serious workloads for years, partially due to personal reasons as I was living abroad for several years. However, I still spend considerable time to keep up to date installations\u00a0(8 beta branch currently) and test it on various hardware including attempts to run it in any possible way on hardware which doesn’t seem supported. These attempts sometimes result in few submitted bugs or communication in mailing lists, sometimes it can be just an interesting story to tell. I usually keep NetBSD (amd64) system in one or two external hard drives (USB, thunderbolt) except when system doesn’t support x86-64 extensions or are not x86 in general (have two Alpha CPU based systems but lately they are dormant and I don’t have a chance to test them).<\/p>\n

One such non 64-bit test system is my old VIA VT-310DP based computer.\u00a0 I’ve been using since 2008. It is a quite unique board featuring two physical VIA EDEN-N CPUs on mini-itx form factor board (haven’t seen such decision on any other mini-itx board yet, probably it was bold move to enter emerging multi core CPU race from AMD and Intel). Though I was trying to replace it many times with newer boards but eventually it became permanent NetBSD testbed when others went away. Using same system for a long time shows quite a good progress in system stability and support. I’ve started with NetBSD 5 release candidate build which couldn’t boot without multi-CPU support disabled and required ACPI disabled as well for a bit more stability. Even booted the network was completely unstable, USB devices were crashing (most likely ACPI issues) including older 4th based releases. Padlock engine was failing as well. System crash, failed network or USB device error weren’t something uncommon those days. Most of them were fixed for the 6th release, some even on subsequent 5.x releases. One fix I was quite proud to help to resolve myself (specifically multi CPU issue). Just recently I also reported an issue related to RNG refactoring. NetBSD 8.0 beta currently works very well and stable in the terminal.\u00a0 X.org is still a different story but I was never focusing on it as the system integrated graphics is not very capable for such tasks anyway with only 64MB shared memory max avail in BIOS (plus considering weak system performance it is more suitable for background tasks like NAS server for example).<\/p>\nVT-310 custom build kernel dmesg with padlock, viadrm enabled<\/span>

\n

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
\n2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
\nThe NetBSD Foundation, Inc. All rights reserved.
\nCopyright (c) 1982, 1986, 1989, 1991, 1993
\nThe Regents of the University of California. All rights reserved.<\/p>\n

NetBSD 8.0_BETA (VT-31ODP) #0: Thu Jul 27 08:34:32 EEST 2017
\ntotal memory = 1981 MB
\navail memory = 1933 MB
\ncpu_rng: VIA
\nrnd: seeded with 128 bits
\ntimecounter: Timecounters tick every 10.000 msec
\nKernelized RAIDframe activated
\nrunning cgd selftest aes-xts-256 aes-xts-512 done
\ntimecounter: Timecounter “i8254” frequency 1193182 Hz quality 100
\nVIA Technologies, Inc. CN400-8237 ( )
\nmainbus0 (root)
\nACPI: RSDP 0x00000000000F8940 000014 (v00 CN400 )
\nACPI: RSDT 0x000000007BDE3040 00002C (v01 CN400 AWRDACPI 42302E31 AWRD 00000000)
\nACPI: FACP 0x000000007BDE30C0 000074 (v01 CN400 AWRDACPI 42302E31 AWRD 00000000)
\nACPI: DSDT 0x000000007BDE3180 004D8C (v01 CN400 AWRDACPI 00001000 MSFT 0100000E)
\nACPI: FACS 0x000000007BDE0000 000040
\nACPI: APIC 0x000000007BDE7F80 000068 (v01 CN400 AWRDACPI 42302E31 AWRD 00000000)
\nACPI: 1 ACPI AML tables successfully acquired and loaded
\nioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x3, 24 pins
\ncpu0 at mainbus0 apid 0
\ncpu0: VIA Nehemiah, id 0x69a
\ncpu0: package 0, core 0, smt 0
\ncpu1 at mainbus0 apid 1
\ncpu1: VIA Nehemiah, id 0x69a
\ncpu1: package 0, core 0, smt 0
\nacpi0 at mainbus0: Intel ACPICA 20170303
\nacpi0: X\/RSDT: OemId <CN400 ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
\nacpi0: SCI interrupting at int 9
\ntimecounter: Timecounter “ACPI-Fast” frequency 3579545 Hz quality 1000
\nacpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
\nMEM (PNP0C01) at acpi0 not configured
\nPMIO (PNP0C02) at acpi0 not configured
\nSYSR (PNP0C02) at acpi0 not configured
\nattimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
\npcppi1 at acpi0 (SPKR, PNP0800): io 0x61
\nmidi0 at pcppi1: PC speaker
\nsysbeep0 at pcppi1
\nCOPR (PNP0C04) at acpi0 not configured
\nUAR1 (PNP0501) at acpi0 not configured
\nUAR2 (PNP0501) at acpi0 not configured
\nacpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
\nacpitz0 at acpi0 (THRM): cpu0
\nacpitz0: active cooling level 0: 100.0C
\nacpitz0: levels: critical 100.0 C, passive 100.0 C
\napm0 at acpi0: Power Management spec V1.2
\nACPI: Enabled 1 GPEs in block 00 to 0F
\nattimer1: attached to pcppi1
\npci0 at mainbus0 bus 0: configuration mode 1
\npci0: i\/o space, memory space enabled, rd\/line, rd\/mult, wr\/inv ok
\npchb0 at pci0 dev 0 function 0: vendor 1106 product 0259 (rev. 0x00)
\nagp0 at pchb0: aperture at 0xe8000000, size 0x8000000
\npchb1 at pci0 dev 0 function 1: vendor 1106 product 1259 (rev. 0x00)
\npchb2 at pci0 dev 0 function 2: vendor 1106 product 2259 (rev. 0x00)
\npchb3 at pci0 dev 0 function 3: vendor 1106 product 3259 (rev. 0x00)
\npchb4 at pci0 dev 0 function 4: vendor 1106 product 4259 (rev. 0x00)
\npchb5 at pci0 dev 0 function 7: vendor 1106 product 7259 (rev. 0x00)
\nppb0 at pci0 dev 1 function 0: vendor 1106 product b198 (rev. 0x00)
\npci1 at ppb0 bus 1
\npci1: i\/o space, memory space enabled
\nvga0 at pci1 dev 0 function 0: vendor 1106 product 3118 (rev. 0x02)
\nwsdisplay0 at vga0 kbdmux 1: console (80×25, vt100 emulation)
\nwsmux1: connecting to wsdisplay0
\nviadrm0 at vga0: VIA CN400 \/ PM8X0
\nviadrm0: AGP at 0xe8000000 128MB
\nviadrm0: Initialized via 2.11.1 20070202
\nfxp0 at pci0 dev 9 function 0: i82551 Ethernet (rev. 0x10)
\nfxp0: interrupting at ioapic0 pin 17
\nfxp0: Ethernet address
\ninphy0 at fxp0 phy 1: i82555 10\/100 media interface, rev. 4
\ninphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
\nvge0 at pci0 dev 10 function 0: VIA VT612X Gigabit Ethernet (rev. 0x11)
\nvge0: interrupting at ioapic0 pin 18
\nvge0: Ethernet address:
\nciphy0 at vge0 phy 1: Cicada CS8201 10\/100\/1000TX PHY, rev. 2
\nciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
\npci_mem_find: expected type mem, found i\/o
\nviaide0 at pci0 dev 15 function 0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
\nviaide0: bus-master DMA support present
\nviaide0: primary channel wired to native-PCI mode
\nviaide0: using ioapic0 pin 20 for native-PCI interrupt
\natabus0 at viaide0 channel 0
\nviaide0: secondary channel wired to native-PCI mode
\natabus1 at viaide0 channel 1
\nviaide1 at pci0 dev 15 function 1
\nviaide1: VIA Technologies VT8237 ATA133 controller
\nviaide1: bus-master DMA support present
\nviaide1: primary channel configured to compatibility mode
\nviaide1: primary channel interrupting at ioapic0 pin 14
\natabus2 at viaide1 channel 0
\nviaide1: secondary channel configured to compatibility mode
\nviaide1: secondary channel ignored (disabled)
\nuhci0 at pci0 dev 16 function 0: vendor 1106 product 3038 (rev. 0x81)
\nuhci0: interrupting at ioapic0 pin 21
\nusb0 at uhci0: USB revision 1.0
\nuhci1 at pci0 dev 16 function 1: vendor 1106 product 3038 (rev. 0x81)
\nuhci1: interrupting at ioapic0 pin 21
\nusb1 at uhci1: USB revision 1.0
\nuhci2 at pci0 dev 16 function 2: vendor 1106 product 3038 (rev. 0x81)
\nuhci2: interrupting at ioapic0 pin 21
\nusb2 at uhci2: USB revision 1.0
\nuhci3 at pci0 dev 16 function 3: vendor 1106 product 3038 (rev. 0x81)
\nuhci3: interrupting at ioapic0 pin 21
\nusb3 at uhci3: USB revision 1.0
\nehci0 at pci0 dev 16 function 4: vendor 1106 product 3104 (rev. 0x86)
\nehci0: interrupting at ioapic0 pin 21
\nehci0: dropped intr workaround enabled
\nehci0: BIOS refuses to give up ownership, using force
\nehci0: EHCI version 1.0
\nehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
\nusb4 at ehci0: USB revision 2.0
\nviapcib0 at pci0 dev 17 function 0: vendor 1106 product 3227 (rev. 0x00)
\nviapcib0: SMBus found at 0x500 (revision 0x0)
\niic0 at viapcib0: I2C bus
\nauvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC’97 Audio (rev 0x60)
\nauvia0: interrupting at ioapic0 pin 22
\nauvia0: ac97: VIA Technologies VT1616i codec; headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
\nauvia0: ac97: ext id 0x1c1<LDAC,SDAC,CDAC,VRA>
\naudio0 at auvia0: full duplex, playback, capture, mmap, independent
\nauvia0: Virtual format configured – Format SLINEAR, precision 16, channels 2, frequency 48000
\nvr0 at pci0 dev 18 function 0: vendor 1106 product 3065 (rev. 0x78)
\nvr0: interrupting at ioapic0 pin 23
\nvr0: Ethernet address:
\nukphy0 at vr0 phy 1: OUI 0x0002c6, model 0x0032, rev. 10
\nukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
\nisa0 at viapcib0
\ncom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
\ncom1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
\npckbc0 at isa0 port 0x60-0x64
\nacpicpu0 at cpu0: ACPI CPU
\nacpicpu0: C1: HLT, lat 0 us, pow 0 mW
\npadlock0 at cpu0: VIA PadLock
\nacpicpu1 at cpu1: ACPI CPU
\ntimecounter: Timecounter “clockinterrupt” frequency 100 Hz quality 0
\npadlock0: RNG ACE
\nuhub0 at usb0: vendor 1106 (0x1106) UHCI root hub (0000), class 9\/0, rev 1.00\/1.00, addr 1
\nuhub0: 2 ports with 2 removable, self powered
\nuhub1 at usb1: vendor 1106 (0x1106) UHCI root hub (0000), class 9\/0, rev 1.00\/1.00, addr 1
\nuhub1: 2 ports with 2 removable, self powered
\nuhub2 at usb2IPsec: Initialized Security Association Processing.
\n: vendor 1106 (0x1106) UHCI root hub (0000), class 9\/0, rev 1.00\/1.00, addr 1
\nuhub2: 2 ports with 2 removable, self powered
\nuhub3 at usb3: vendor 1106 (0x1106) UHCI root hub (0000), class 9\/0, rev 1.00\/1.00, addr 1
\nuhub3: 2 ports with 2 removable, self powered
\nuhub4 at usb4: vendor 1106 (0x1106) EHCI root hub (0000), class 9\/0, rev 2.00\/1.00, addr 1
\nuhub4: 8 ports with 8 removable, self powered
\nviaide0 port 0: device present, speed: 1.5Gb\/s
\nwd0 at atabus0 drive 0
\nwd0: <SAMSUNG HD160JJ>
\nwd0: drive supports 16-sector PIO transfers, LBA48 addressing
\nwd0: 149 GB, 310098 cyl, 16 head, 63 sec, 512 bytes\/sect x 312579695 sectors
\nwd0: 32-bit data port
\nwd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
\nwd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra\/133) (using DMA)
\nboot device: wd0
\nroot on wd0a dumps on wd0b
\nroot file system type: ffs
\nkern.module.path=\/stand\/i386\/8.0\/modules
\nuhidev0 at uhub1 port 1 configuration 1 interface 0
\nuhidev0: Kensington (0x47d) Kensington USB\/PS2 Orbit (0x1022), rev 1.10\/4.00, addr 2, iclass 3\/1
\nums0 at uhidev0: 2 buttons
\nwsmouse0 at ums0 mux 0
\nuhidev1 at uhub1 port 2 configuration 1 interface 0
\nuhidev1: USB (0x1c4f) USB Keykoard (0x02), rev 1.10\/1.10, addr 3, iclass 3\/1
\nukbd0 at uhidev1
\nwskbd0 at ukbd0: console keyboard, using wsdisplay0
\nuhidev2 at uhub1 port 2 configuration 1 interface 1
\nuhidev2: USB (0x1c4f) USB Keykoard (0x02), rev 1.10\/1.10, addr 3, iclass 3\/0
\nuhidev2: 2 report ids
\nuhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
\nuhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
\nwsdisplay0: screen 1 added (80×25, vt100 emulation)
\nwsdisplay0: screen 2 added (80×25, vt100 emulation)
\nwsdisplay0: screen 3 added (80×25, vt100 emulation)
\nwsdisplay0: screen 4 added (80×25, vt100 emulation)<\/p>\n<\/div>\n

 <\/p>\n

Another playground was my Mac Mini system (Late 2014 model, MGEN2AE\/A).\u00a0 I tried to boot NetBSD 7 on it over a year ago but the USB 3 was still experimental and I couldn’t find any way to boot into it (still didn’t have thunderbolt hard drive at that time). NetBSD 8 beta branch has xhci driver enabled by default, unfortunately system still hangs on the boot (pretty sure it is related to USB 3 support). I managed to boot into the system by disabling ACPI but without USB support I don’t have any input devices available, so it is literally useless. It is possible to boot into the system from external thunderbolt drive (not sure how is it routed internally but NetBSD manages to identify it the same as SATA connected drive) or internal mac drive.\u00a0 Personally I used USB flash drive to load a bootloader and kept installation on the thunderbolt drive (boot loader can start loading the kernel even if it is in USB drive). Unfortunately till USB 3 support is fixed, dmesg (from the boot without ACPI support) is the only thing I can share here.<\/p>\nMac Mini dmesg<\/span>

\n

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
\n2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
\nThe NetBSD Foundation, Inc. All rights reserved.
\nCopyright (c) 1982, 1986, 1989, 1991, 1993
\nThe Regents of the University of California. All rights reserved.<\/p>\n

NetBSD 8.0_BETA (GENERIC.201708131900Z)
\ntotal memory = 8068 MB
\navail memory = 7812 MB
\ncpu_rng: RDRAND
\ntimecounter: Timecounters tick every 10.000 msec
\nKernelized RAIDframe activated
\nrunning cgd selftest aes-xts-256 aes-xts-512 done
\nRTC BIOS diagnostic error 0xff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
\ntimecounter: Timecounter “i8254” frequency 1193182 Hz quality 100
\nApple Inc. Macmini7,1 (1.0)
\nmainbus0 (root)
\ncpu0 at mainbus0
\ncpu0: Intel(R) Core(TM) i5-4278U CPU @ 2.60GHz, id 0x40651
\ncpu0: package 0, core 0, smt 0
\npci0 at mainbus0 bus 0: configuration mode 1
\npci0: i\/o space, memory space enabled, rd\/line, rd\/mult, wr\/inv ok
\npchb0 at pci0 dev 0 function 0: vendor 8086 product 0a04 (rev. 0x09)
\ni915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0a2e (rev. 0x09)
\ndrm: Memory usable by graphics device = 2048M
\ndrm: Supports vblank timestamp caching Rev 2 (21.10.2013).
\ndrm: Driver supports precise vblank timestamp query.
\ni915drmkms0: interrupting at irq 11 (i915)
\nintelfb0 at i915drmkms0
\ni915drmkms0: info: registered panic notifier
\nintelfb0: framebuffer at 0xffff80008dd68000, size 1920×1080, depth 32, stride 7680
\nwsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation)
\nwsmux1: connecting to wsdisplay0
\nhdaudio0 at pci0 dev 3 function 0: HD Audio Controller
\nhdaudio0: interrupting at irq 11
\nhdaudio0: RIRB timeout
\nhdaudio0: RIRB timeout
\nxhci0 at pci0 dev 20 function 0: vendor 8086 product 9c31 (rev. 0x04)
\npci_intr_map: no mapping for pin A (line=00)
\ncannot set up pci_intr_handle_t
\nxhci0: can’t allocate handler
\nvendor 8086 product 9c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
\nhdaudio1 at pci0 dev 27 function 0: HD Audio Controller
\nhdaudio1: interrupting at irq 10
\nhdafg0 at hdaudio1: vendor 1013 product 4208
\nhdafg0: DAC00 2ch: Speaker [Built-In]\nhdafg0: DAC01 2ch: HP Out [Jack]\nhdafg0: DIG02 2ch: SPDIF Out [Jack]\nhdafg0: ADC03 2ch: Mic In [Jack]\nhdafg0: 2ch\/2ch 48000Hz PCM16*
\naudio0 at hdafg0: full duplex, playback, capture, mmap, independent
\nhdafg0: Virtual format configured – Format SLINEAR, precision 16, channels 2, frequency 48000
\nspkr0 at audio0: PC Speaker (synthesized)
\nppb0 at pci0 dev 28 function 0: vendor 8086 product 9c10 (rev. 0xe4)
\nppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT\/s
\npci1 at ppb0 bus 1
\npci1: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb1 at pci0 dev 28 function 2: vendor 8086 product 9c14 (rev. 0xe4)
\nppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT\/s
\nppb1: link is x1 @ 2.5GT\/s
\npci2 at ppb1 bus 2
\npci2: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nvendor 14e4 product 43a0 (miscellaneous network, revision 0x03) at pci2 dev 0 function 0 not configured
\nppb2 at pci0 dev 28 function 3: vendor 8086 product 9c16 (rev. 0xe4)
\nppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT\/s
\nppb2: link is x1 @ 2.5GT\/s
\npci3 at ppb2 bus 3
\npci3: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nbge0 at pci3 dev 0 function 0: Broadcom BCM57766 Gigabit Ethernet
\nbge0: interrupting at irq 11
\nbge0: HW config 00081154, 00006014, 00002838, 00000000 00000000
\nbge0: ASIC unknown BCM57766 (0x57766001), Ethernet address
\nbge0: setting short Tx thresholds
\nbrgphy0 at bge0 phy 1: BCM57765 1000BASE-T media interface, rev. 1
\nbrgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
\nsdhc0 at pci3 dev 0 function 1: vendor 14e4 product 16bc (rev. 0x01)
\nsdhc0: interrupting at irq 11
\nsdhc0: SDHC 3.0, rev 21, SDMA, 200000 kHz, HS SDR50 DDR50 SDR104 HS200 1.8V 3.0V 3.3V, re-tuning mode 1 (1s timer), 2048 byte blocks
\nsdmmc0 at sdhc0 slot 0
\nppb3 at pci0 dev 28 function 4: vendor 8086 product 9c18 (rev. 0xe4)
\nppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT\/s
\npci4 at ppb3 bus 4
\npci4: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb4 at pci4 dev 0 function 0: vendor 8086 product 156d (rev. 0x00)
\nppb4: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
\npci5 at ppb4 bus 5
\npci5: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb5 at pci5 dev 0 function 0: vendor 8086 product 156d (rev. 0x00)
\nppb5: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 2.5GT\/s
\npci6 at ppb5 bus 6
\npci6: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nvendor 8086 product 156c (miscellaneous system) at pci6 dev 0 function 0 not configured
\nppb6 at pci5 dev 3 function 0: vendor 8086 product 156d (rev. 0x00)
\nppb6: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 2.5GT\/s
\npci7 at ppb6 bus 7
\npci7: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb7 at pci7 dev 0 function 0: vendor 8086 product 1549 (rev. 0x00)
\nppb7: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
\npci8 at ppb7 bus 8
\npci8: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb8 at pci8 dev 0 function 0: vendor 8086 product 1549 (rev. 0x00)
\nppb8: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 5.0GT\/s
\npci9 at ppb8 bus 9
\npci9: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nahcisata0 at pci9 dev 0 function 0: vendor 1b21 product 0612 (rev. 0x01)
\nahcisata0: interrupting at irq 11
\nahcisata0: 64-bit DMA
\nahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP 0xeb32ffa1<SXS,CCCS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SSS,SSNTF,SNCQ,S64A>
\natabus0 at ahcisata0 channel 0
\natabus1 at ahcisata0 channel 1
\nppb9 at pci5 dev 4 function 0: vendor 8086 product 156d (rev. 0x00)
\nppb9: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 2.5GT\/s
\npci10 at ppb9 bus 56
\npci10: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb10 at pci5 dev 5 function 0: vendor 8086 product 156d (rev. 0x00)
\nppb10: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 2.5GT\/s
\npci11 at ppb10 bus 57
\npci11: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb11 at pci5 dev 6 function 0: vendor 8086 product 156d (rev. 0x00)
\nppb11: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 2.5GT\/s
\npci12 at ppb11 bus 106
\npci12: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\npcib0 at pci0 dev 31 function 0: vendor 8086 product 9c43 (rev. 0x04)
\nahcisata1 at pci0 dev 31 function 2: vendor 8086 product 9c03 (rev. 0x04)
\nahcisata1: interrupting at irq 11
\nahcisata1: 64-bit DMA
\nahcisata1: AHCI revision 1.30, 1 port, 32 slots, CAP 0xc734ff00<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
\natabus2 at ahcisata1 channel 0
\nichsmb0 at pci0 dev 31 function 3: vendor 8086 product 9c22 (rev. 0x04)
\nichsmb0: interrupting at irq 11
\niic0 at ichsmb0: I2C bus
\nisa0 at pcib0
\ncom0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
\nattimer0 at isa0 port 0x40-0x43
\npcppi0 at isa0 port 0x61
\nspkr1 at pcppi0: PC Speaker
\nmidi0 at pcppi0: PC speaker
\nsysbeep0 at pcppi0
\nattimer0: attached to pcppi0
\ncoretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
\ntimecounter: Timecounter “clockinterrupt” frequency 100 Hz quality 0
\ntimecounter: Timecounter “TSC” frequency 2600191360 Hz quality 3000
\nIPsec: Initialized Security Association Processing.
\nahcisata0 port 0: device present, speed: 6.0Gb\/s
\nahcisata1 port 0: device present, speed: 3.0Gb\/s
\ndrm: Enabling RC6 states: RC6 on, RC6p off, RC6pp off
\nwd0 at atabus0 drive 0
\nwd0: <TS256GSJM500>
\nwd0: drive supports 2-sector PIO transfers, LBA48 addressing
\nwd0: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes\/sect x 500118192 sectors
\nwd0: GPT GUID: aa426d16-0d0e-40a1-90e7-9a75f7b5c75f
\ndk0 at wd0: “67b20926-002a-424f-a169-2c7efc563bb9”, 614401 blocks at 4097, type: msdos
\ndk1 at wd0: “5d7e40e5-4454-4a98-a81e-c5223d78f161”, 421527550 blocks at 618498, type: <unknown>
\ndk2 at wd0: “ed7d719c-6ef4-451f-9732-2e4dd981273b”, 35925033 blocks at 464178417, type: <unknown>
\ndk3 at wd0: “731c9349-02e0-471d-93db-99f63c06afe8”, 42032369 blocks at 422146048, type: ffs
\nwd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133)
\nwd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133) (using DMA)
\nwd1 at atabus2 drive 0
\nwd1: <APPLE HDD HTS541010A9E662>
\nwd1: drive supports 16-sector PIO transfers, LBA48 addressing
\nwd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes\/sect x 1953525168 sectors
\nwd1: GPT GUID: 6ff6bde0-2008-46e7-9c6f-171bdb49d5cf
\ndk4 at wd1: “EFI System Partition”, 409600 blocks at 40, type: msdos
\ndk5 at wd1: “Customer”, 1951845952 blocks at 409640, type: <unknown>
\ndk6 at wd1: “Recovery HD”, 1269536 blocks at 1952255592, type: <unknown>
\nwd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133)
\nwd1(ahcisata1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133) (using DMA)
\npad0: outputs: 44100Hz, 16-bit, stereo
\naudio1 at pad0: half duplex, playback, capture, mmap
\npad0: Virtual format configured – Format SLINEAR, precision 16, channels 2, frequency 44100
\nspkr2 at audio1: PC Speaker (synthesized)
\nWARNING: 3 errors while detecting hardware; check system log.
\nboot device: wd0
\nroot on dk3
\nroot file system type: ffs
\nkern.module.path=\/stand\/amd64\/8.0\/modules
\nwarning: no \/dev\/console<\/p>\n<\/div>\n

 <\/p>\n

Other two systems I have tried had much better luck and hardware support. The first one is lenovo G50-80 laptop with Intel i3-4030U CPU. I needed to disable secure boot and enable legacy boot support\u00a0in BIOS but USB3 was working perfectly (which wasn’t the case with in NetBSD 7 experimental support) and I could boot into the system from USB3 port. WIFI setup was also seamless. Looking at dmesg gives a strong hope that system can be quite well supported and usable. But I didn’t go further than that. Major testing was done on my main desktop computer with Gigabyte GA-990XA-UD3 (rev1) motherboard, AMD Opteron 3280 CPU and Radeon RX 460 GPU. I even compiled Mate desktop on it (from pkgsrc). It works really smoothly, all hardware seems to be supported pretty well and it can be used as a desktop system for sure. I haven’t done that for while but I believe I can spend some time in NetBSD again :).<\/p>\nLenovo G50-80 dmesg<\/span>

\n

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
\n2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
\nThe NetBSD Foundation, Inc. All rights reserved.
\nCopyright (c) 1982, 1986, 1989, 1991, 1993
\nThe Regents of the University of California. All rights reserved.<\/p>\n

NetBSD 8.0_BETA (GENERIC) #0: Fri Jul 21 20:33:16 UTC 2017
\nandrius@localhost:\/home\/andrius\/netbsd-src\/sys\/arch\/amd64\/compile\/GENERIC
\ntotal memory = 16310 MB
\navail memory = 15814 MB
\ncpu_rng: RDRAND
\nrnd: seeded with 128 bits
\ntimecounter: Timecounters tick every 10.000 msec
\nKernelized RAIDframe activated
\nrunning cgd selftest aes-xts-256 aes-xts-512 done
\nRTC BIOS diagnostic error 0x80<clock_battery>
\ntimecounter: Timecounter “i8254” frequency 1193182 Hz quality 100
\nLENOVO 80L0 (Lenovo G50-80)
\nmainbus0 (root)
\nACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
\nACPI: XSDT 0x000000009CFD0188 0000C4 (v01 LENOVO CB-01 00000001 01000013)
\nACPI: FACP 0x000000009CFF6000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: DSDT 0x000000009CFE1000 00FE68 (v02 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: FACS 0x000000009CF7A000 000040
\nACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: ASF! 0x000000009CFFA000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: BOOT 0x000000009CFF8000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: LPIT 0x000000009CFF4000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: MCFG 0x000000009CFF2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: SSDT 0x000000009CFDB000 000B74 (v02 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: ASPT 0x000000009CFF9000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: HPET 0x000000009CFF5000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: WDAT 0x000000009CFF1000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: SSDT 0x000000009CFDC000 0004D6 (v02 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: MSDM 0x000000009CFFB000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: APIC 0x000000009CFF3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: SSDT 0x000000009CFD5000 005AC3 (v02 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: SSDT 0x000000009CFDD000 00342F (v02 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: DBGP 0x000000009CFF7000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: DMAR 0x000000009CFD4000 0000F0 (v01 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: CSRT 0x000000009CFD3000 0000C4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: FPDT 0x000000009CFD2000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
\nACPI: Executed 7 blocks of module-level executable AML code
\nACPI: 5 ACPI AML tables successfully acquired and loaded
\nioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 40 pins
\nx2APIC available but disabled by DMAR table
\ncpu0 at mainbus0 apid 0
\ncpu0: Intel(R) Core(TM) i3-4030U CPU @ 1.90GHz, id 0x40651
\ncpu0: package 0, core 0, smt 0
\ncpu1 at mainbus0 apid 2
\ncpu1: Intel(R) Core(TM) i3-4030U CPU @ 1.90GHz, id 0x40651
\ncpu1: package 0, core 1, smt 0
\ncpu2 at mainbus0 apid 1
\ncpu2: Intel(R) Core(TM) i3-4030U CPU @ 1.90GHz, id 0x40651
\ncpu2: package 0, core 0, smt 1
\ncpu3 at mainbus0 apid 3
\ncpu3: Intel(R) Core(TM) i3-4030U CPU @ 1.90GHz, id 0x40651
\ncpu3: package 0, core 1, smt 1
\nacpi0 at mainbus0: Intel ACPICA 20170303
\nacpi0: X\/RSDT: OemId <LENOVO,CB-01 ,00000001>, AslId < ,01000013>
\nACPI Error: No handler for Region [ERAM] (0xfffffe845b4b3158) [EmbeddedControl] (20170303\/evregion-183)
\nACPI Error: Region EmbeddedControl (ID=3) has no handler (20170303\/exfldio-323)
\nACPI Error: Method parse\/execution failed [\\_SB.PCI0.LPCB.EC0.BAT0._STA] (Node 0xfffffe845b4ad6f8), AE_NOT_EXIST (20170303\/psparse-560)
\nACPI Error: Method execution failed [\\_SB.PCI0.LPCB.EC0.BAT0._STA] (Node 0xfffffe845b4ad6f8), AE_NOT_EXIST (20170303\/uteval-111)
\nacpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
\nACPI: Dynamic OEM Table Load:
\nACPI: SSDT 0xFFFFFE845B452808 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20121220)
\nACPI: Dynamic OEM Table Load:
\nACPI: SSDT 0xFFFFFE811D21D808 0005AA (v02 PmRef ApIst 00003000 INTL 20121220)
\nACPI: Dynamic OEM Table Load:
\nACPI: SSDT 0xFFFFFE811D11FE88 000119 (v02 PmRef ApCst 00003000 INTL 20121220)
\nACPI Error: No handler for Region [ERAM] (0xfffffe845b4b3158) [EmbeddedControl] (20170303\/evregion-183)
\nACPI Error: Region EmbeddedControl (ID=3) has no handler (20170303\/exfldio-323)
\nACPI Error: Method parse\/execution failed [\\_SB.PCI0.LPCB.EC0.BAT0._STA] (Node 0xfffffe845b4ad6f8), AE_NOT_EXIST (20170303\/psparse-560)
\nACPI Error: Method execution failed [\\_SB.PCI0.LPCB.EC0.BAT0._STA] (Node 0xfffffe845b4ad6f8), AE_NOT_EXIST (20170303\/uteval-111)
\nacpi0: SCI interrupting at int 9
\ntimecounter: Timecounter “ACPI-Safe” frequency 3579545 Hz quality 900
\nhpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
\ntimecounter: Timecounter “hpet0” frequency 14318180 Hz quality 2000
\nacpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
\nacpivga0 at acpi0 (GFX0): ACPI Display Adapter
\nacpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
\nacpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
\nacpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
\nacpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
\nacpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
\nacpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
\nacpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
\nacpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
\nacpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
\nacpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
\nacpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
\nacpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
\nacpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
\nacpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
\nacpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
\nacpiout15 at acpivga0 (DD1F, 0x0410): ACPI Display Output Device
\nacpiout15: brightness levels: [0-100]\nacpivga0: unknown output device acpiout0
\nacpivga0: unknown output device acpiout1
\nacpivga0: unknown output device acpiout2
\nacpivga0: unknown output device acpiout3
\nacpivga0: unknown output device acpiout4
\nacpivga0: unknown output device acpiout5
\nacpivga0: unknown output device acpiout6
\nacpivga0: unknown output device acpiout7
\nacpivga0: unknown output device acpiout8
\nacpivga0: unknown output device acpiout9
\nacpivga0: unknown output device acpiout10
\nacpivga0: unknown output device acpiout11
\nacpivga0: unknown output device acpiout12
\nacpivga0: unknown output device acpiout13
\nacpivga0: unknown output device acpiout14
\nacpivga0: unknown output device acpiout15
\nacpivga0: connected output devices:
\nacpivga0: 0x0400: Unknown Output Device, head 0
\nacpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
\nVPC0 (VPC2004) at acpi0 not configured
\nFWHD (INT0800) at acpi0 not configured
\nLDRC (PNP0C02) at acpi0 not configured
\nattimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
\nCWDT (INT3F0D) at acpi0 not configured
\npckbc1 at acpi0 (PS2K, IDEA0100) (kbd port): io 0x60,0x64 irq 1
\npckbc2 at acpi0 (PS2M, SYN2B37) (aux port): irq 12
\nPDRC (PNP0C02) at acpi0 not configured
\nacpiacad0 at acpi0 (ADP0, ACPI0003): ACPI AC Adapter
\nacpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
\nacpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
\nPEPD (INT33A1) at acpi0 not configured
\nPTID (INT340E) at acpi0 not configured
\nACPI: Enabled 5 GPEs in block 00 to 7F
\npckbd0 at pckbc1 (kbd slot)
\npckbc1: using irq 1 for kbd slot
\nwskbd0 at pckbd0: console keyboard
\npms0 at pckbc1 (aux slot)
\npms0: Synaptics touchpad version 8.1
\npms0: Extended W mode, Palm detect, Multi-finger Report, Multi-finger
\npckbc1: using irq 12 for aux slot
\nwsmouse0 at pms0 mux 0
\npci0 at mainbus0 bus 0: configuration mode 1
\npci0: i\/o space, memory space enabled, rd\/line, rd\/mult, wr\/inv ok
\npchb0 at pci0 dev 0 function 0: vendor 8086 product 0a04 (rev. 0x0b)
\ni915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0a16 (rev. 0x0b)
\ndrm: Memory usable by graphics device = 2048M
\ndrm: Supports vblank timestamp caching Rev 2 (21.10.2013).
\ndrm: Driver supports precise vblank timestamp query.
\nACPI Error: [ECR1] Namespace lookup failure, AE_NOT_FOUND (20170303\/psargs-395)
\nACPI Error: Method parse\/execution failed [\\_SB.PCI0.GFX0._DSM] (Node 0xfffffe845b4747c8), AE_NOT_FOUND (20170303\/psparse-560)
\ni915drmkms0: interrupting at msi0 vec 0 (i915)
\nintelfb0 at i915drmkms0
\ni915drmkms0: info: registered panic notifier
\ni915drmkms0: More than 8 outputs detected via ACPI
\nintelfb0: framebuffer at 0xffff80011d4bc000, size 1366×768, depth 32, stride 5504
\nwsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
\nwsmux1: connecting to wsdisplay0
\nhdaudio0 at pci0 dev 3 function 0: HD Audio Controller
\nhdaudio0: interrupting at msi1 vec 0
\nhdaudio0: timeout leaving reset state
\nhdaudio0: device driver failed to attach
\nxhci0 at pci0 dev 20 function 0: vendor 8086 product 9c31 (rev. 0x04)
\nxhci0: interrupting at msi1 vec 0
\nxhci0: xHCI version 1.0
\nusb0 at xhci0: USB revision 3.0
\nusb1 at xhci0: USB revision 2.0
\nvendor 8086 product 9c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
\nhdaudio1 at pci0 dev 27 function 0: HD Audio Controller
\nhdaudio1: interrupting at msi2 vec 0
\nhdafg0 at hdaudio1: vendor 14f1 product 510f
\nhdafg0: DAC00 2ch: Speaker [Built-In]\nhdafg0: ADC01 2ch: Mic In [Built-In]\nhdafg0: ADC02 2ch: Mic In [Jack]\nhdafg0: DAC03 2ch: HP Out [Jack]\nhdafg0: 2ch\/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24
\naudio0 at hdafg0: full duplex, playback, capture, mmap, independent
\nhdafg0: Virtual format configured – Format SLINEAR, precision 16, channels 2, frequency 48000
\nspkr0 at audio0: PC Speaker (synthesized)
\nppb0 at pci0 dev 28 function 0: vendor 8086 product 9c10 (rev. 0xe4)
\nppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT\/s
\npci1 at ppb0 bus 1
\npci1: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb1 at pci0 dev 28 function 2: vendor 8086 product 9c14 (rev. 0xe4)
\nppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT\/s
\nppb1: link is x1 @ 2.5GT\/s
\npci2 at ppb1 bus 2
\npci2: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nre0 at pci2 dev 0 function 0: RealTek 8168\/8111 PCIe Gigabit Ethernet (rev. 0x10)
\nre0: interrupting at msi3 vec 0
\nre0: Unknown revision (0x50800000)
\nre0: Ethernet address
\nre0: using 256 tx descriptors
\nrgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
\nrgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
\nppb2 at pci0 dev 28 function 3: vendor 8086 product 9c16 (rev. 0xe4)
\nppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT\/s
\nppb2: link is x1 @ 2.5GT\/s
\npci3 at ppb2 bus 3
\npci3: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\niwm0 at pci3 dev 0 function 0: vendor 8086 product 08b4 (rev. 0x93)
\niwm0: interrupting at msi4 vec 0
\npcib0 at pci0 dev 31 function 0: vendor 8086 product 9c43 (rev. 0x04)
\nahcisata0 at pci0 dev 31 function 2: vendor 8086 product 9c03 (rev. 0x04)
\nahcisata0: interrupting at ioapic0 pin 19
\nahcisata0: 64-bit DMA
\nahcisata0: AHCI revision 1.30, 4 ports, 32 slots, CAP 0xc734ff03<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
\natabus0 at ahcisata0 channel 0
\natabus1 at ahcisata0 channel 1
\nichsmb0 at pci0 dev 31 function 3: vendor 8086 product 9c22 (rev. 0x04)
\nichsmb0: interrupting at ioapic0 pin 18
\niic0 at ichsmb0: I2C bus
\nisa0 at pcib0
\npcppi0 at isa0 port 0x61
\nspkr1 at pcppi0: PC Speaker
\nmidi0 at pcppi0: PC speaker
\nsysbeep0 at pcppi0
\nattimer1: attached to pcppi0
\nacpicpu0 at cpu0: ACPI CPU
\nacpicpu0: C1: FFH, lat 1 us, pow 1000 mW
\nacpicpu0: C2: FFH, lat 148 us, pow 200 mW
\nacpicpu0: C3: FFH, lat 506 us, pow 200 mW
\nacpicpu0: P0: FFH, lat 10 us, pow 15000 mW, 1900 MHz
\nacpicpu0: P1: FFH, lat 10 us, pow 13939 mW, 1800 MHz
\nacpicpu0: P2: FFH, lat 10 us, pow 13047 mW, 1700 MHz
\nacpicpu0: P3: FFH, lat 10 us, pow 12172 mW, 1600 MHz
\nacpicpu0: P4: FFH, lat 10 us, pow 11172 mW, 1500 MHz
\nacpicpu0: P5: FFH, lat 10 us, pow 10334 mW, 1400 MHz
\nacpicpu0: P6: FFH, lat 10 us, pow 9516 mW, 1300 MHz
\nacpicpu0: P7: FFH, lat 10 us, pow 8712 mW, 1200 MHz
\nacpicpu0: P8: FFH, lat 10 us, pow 7789 mW, 1100 MHz
\nacpicpu0: P9: FFH, lat 10 us, pow 7021 mW, 1000 MHz
\nacpicpu0: P10: FFH, lat 10 us, pow 6270 mW, 900 MHz
\nacpicpu0: P11: FFH, lat 10 us, pow 5537 mW, 800 MHz
\nacpicpu0: P12: FFH, lat 10 us, pow 4688 mW, 779 MHz
\nacpicpu0: T0: I\/O, lat 1 us, pow 0 mW, 100 %
\nacpicpu0: T1: I\/O, lat 1 us, pow 0 mW, 88 %
\nacpicpu0: T2: I\/O, lat 1 us, pow 0 mW, 76 %
\nacpicpu0: T3: I\/O, lat 1 us, pow 0 mW, 64 %
\nacpicpu0: T4: I\/O, lat 1 us, pow 0 mW, 52 %
\nacpicpu0: T5: I\/O, lat 1 us, pow 0 mW, 40 %
\nacpicpu0: T6: I\/O, lat 1 us, pow 0 mW, 28 %
\nacpicpu0: T7: I\/O, lat 1 us, pow 0 mW, 16 %
\ncoretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
\nacpicpu1 at cpu1: ACPI CPU
\ncoretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
\nacpicpu2 at cpu2: ACPI CPU
\nacpicpu3 at cpu3: ACPI CPU
\nDRM error in intel_uncore_check_errors: Unclaimed register before interrupt
\ntimecounter: Timecounter “clockinterrupt” frequency 100 Hz quality 0
\ntimecounter: Timecounter “TSC” frequency 1895732060 Hz quality 3000
\nuhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9\/0, rev 1.00\/1.00, addr 0
\nuhub0: 4 ports with 4 removable, self powered
\nuhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9\/0, rev 2.00\/1.00, addr 0
\nuhub1: 9 ports with 9 removable, self powered
\nacpiacad0: AC adapter online.
\nIPsec: Initialized Security Association Processing.
\nahcisata0 port 0: device present, speed: 6.0Gb\/s
\nahcisata0 port 1: device present, speed: 1.5Gb\/s
\ndrm: Enabling RC6 states: RC6 on, RC6p off, RC6pp off
\nwd0 at atabus0 drive 0
\nwd0: <WDC WD5000LPCX-24C6HT0>
\nwd0: drive supports 16-sector PIO transfers, LBA48 addressing
\nwd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes\/sect x 976773168 sectors
\numass0 at uhub0 port 1 configuration 1 interface 0
\numass0: Western Digital (0x1058) Elements 10A8 (0x10a8), rev 3.00\/10.42, addr 1
\numass0: using SCSI over Bulk-Only
\nuhidev0 at uhub1 port 1 configuration 1 interface 0
\nuhidev0: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00\/12.03, addr 2, iclass 3\/1
\nscsibus0 at umass0: 2 targets, 1 lun per target
\nukbd0 at uhidev0
\nsd0 at scsibus0 target 0 lun 0: <WD, Elements 10A8, 1042> disk fixed
\nsd0: fabricating a geometry
\nsd0: 931 GB, 953837 cyl, 64 head, 32 sec, 512 bytes\/sect x 1953458176 sectors
\nsd0: fabricating a geometry
\nwd0: GPT GUID: f747ee4d-1956-429e-b0c7-42bece5bdc0b
\ndk0 at wd0: “Basic data partition”, 2048000 blocks at 2048, type: <unknown>
\ndk1 at wd0: “EFI system partition”, 532480 blocks at 2050048, type: msdos
\ndk2 at wd0: “b077eada-048e-4e51-bf90-1538ba79b1fb”, 2048000 blocks at 2582528, type: <unknown>
\nwd0: wedge named ‘Basic data partition’ already existed, using ‘b077eada-048e-4e51-bf90-1538ba79b1fb’
\ndk3 at wd0: “Microsoft reserved partition”, 262144 blocks at 4630528, type: <unknown>
\ndk4 at wd0: “6c826e57-0ee1-4609-b1dd-662eecffb680”, 888635392 blocks at 4892672, type: <unknown>
\nwd0: wedge named ‘Basic data partition’ already existed, using ‘6c826e57-0ee1-4609-b1dd-662eecffb680’
\ndk5 at wd0: “123470c0-30a6-4c0f-b7a7-00239c6c2e27”, 52428800 blocks at 893528064, type: <unknown>
\nwd0: wedge named ‘Basic data partition’ already existed, using ‘123470c0-30a6-4c0f-b7a7-00239c6c2e27’
\ndk6 at wd0: “4b0b1fc8-b38c-4ed2-9393-617233127877”, 30816256 blocks at 945956864, type: <unknown>
\nwd0: wedge named ‘Basic data partition’ already existed, using ‘4b0b1fc8-b38c-4ed2-9393-617233127877’
\nwd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133)
\nwd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133) (using DMA)
\natapibus0 at atabus1: 1 targets
\ncd0 at atapibus0 drive 0: <MATSHITA DVD-RAM UJ8FBS, 8SSDX0E66033P1CC5244, F801> cdrom removable
\ncd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra\/100)
\ncd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra\/100) (using DMA)
\nwskbd1 at ukbd0 mux 1
\nwskbd1: connecting to wsdisplay0
\nuhidev1 at uhub1 port 1 configuration 1 interface 1
\nuhidev1: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00\/12.03, addr 2, iclass 3\/1
\nuhidev1: 8 report ids
\nums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
\nwsmouse1 at ums0 mux 0
\nuhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
\nuhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
\nuhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
\nuhidev2 at uhub1 port 1 configuration 1 interface 2
\nuhidev2: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00\/12.03, addr 2, iclass 3\/0
\nuhidev2: 33 report ids
\nuhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
\nuhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
\nuhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
\nuhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
\nugen0 at uhub1 port 4
\nugen0: Generic (0xbda) USB2.0-CRW (0x129), rev 2.00\/39.60, addr 3
\nuvideo0 at uhub1 port 6 configuration 1 interface 0: Bsion Corp. (0x5986) Lenovo EasyCamera (0x55d), rev 2.00\/36.55, addr 4
\nvideo0 at uvideo0: Bsion Corp. (0x5986) Lenovo EasyCamera (0x55d), rev 2.00\/36.55, addr 4
\nubt0 at uhub1 port 7
\nubt0: vendor 8087 (0x8087) product 07dc (0x7dc), rev 2.00\/0.01, addr 5
\npad0: outputs: 44100Hz, 16-bit, stereo
\naudio1 at pad0: half duplex, playback, capture, mmap
\npad0: Virtual format configured – Format SLINEAR, precision 16, channels 2, frequency 44100
\nspkr2 at audio1: PC Speaker (synthesized)
\nWARNING: 23 errors while detecting hardware; check system log.
\nboot device: sd0
\nroot on sd0a dumps on sd0b
\nroot file system type: ffs
\nkern.module.path=\/stand\/amd64\/8.0\/modules
\niwm0: hw rev 0x160, fw ver 17.352738.0, address f4:06:69:62:cf:50
\niwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
\niwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
\niwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps<\/p>\n<\/div>\n

 <\/p>\nOpteron 3280 dmesg<\/span>

\n

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
\n2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
\nThe NetBSD Foundation, Inc. All rights reserved.
\nCopyright (c) 1982, 1986, 1989, 1991, 1993
\nThe Regents of the University of California. All rights reserved.<\/p>\n

NetBSD 8.0_BETA (GENERIC) #0: Fri Jul 21 20:33:16 UTC 2017
\nandrius@localhost:\/home\/andrius\/netbsd-src\/sys\/arch\/amd64\/compile\/GENERIC
\ntotal memory = 8108 MB
\navail memory = 7850 MB
\ntimecounter: Timecounters tick every 10.000 msec
\nKernelized RAIDframe activated
\nrunning cgd selftest aes-xts-256 aes-xts-512 done
\ntimecounter: Timecounter “i8254” frequency 1193182 Hz quality 100
\nGigabyte Technology Co., Ltd. GA-990XA-UD3 ( )
\nmainbus0 (root)
\nACPI: RSDP 0x00000000000F6B00 000014 (v00 GBT )
\nACPI: RSDT 0x00000000BFDD1000 00004C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
\nACPI: FACP 0x00000000BFDD1080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
\nACPI: DSDT 0x00000000BFDD1100 007A4B (v01 GBT GBTUACPI 00001000 MSFT 03000000)
\nACPI: FACS 0x00000000BFDA0000 000040
\nACPI: MSDM 0x00000000BFDD8C40 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
\nACPI: HPET 0x00000000BFDD8CC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
\nACPI: MCFG 0x00000000BFDD8D00 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
\nACPI: EUDS 0x00000000BFDD8D80 000740 (v01 GBT 00000000 00000000)
\nACPI: MATS 0x00000000BFDD94C0 000034 (v01 GBT 00000000 00000000)
\nACPI: TAMG 0x00000000BFDD9530 000182 (v01 GBT GBT B0 5455312E BG?? 53450101)
\nACPI: APIC 0x00000000BFDD8B80 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
\nACPI: MATS 0x00000000BFDD96C0 006209 (v01 MATS RCM 80000001 INTL 20061109)
\nACPI: SSDT 0x00000000BFDDF940 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
\nACPI: 2 ACPI AML tables successfully acquired and loaded
\nioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x21, 24 pins
\ncpu0 at mainbus0 apid 0
\ncpu0: AMD Opteron(tm) Processor 3280 , id 0x600f12
\ncpu0: package 0, core 0, smt 0
\ncpu1 at mainbus0 apid 1
\ncpu1: AMD Opteron(tm) Processor 3280 , id 0x600f12
\ncpu1: package 0, core 3, smt 0
\ncpu2 at mainbus0 apid 2
\ncpu2: AMD Opteron(tm) Processor 3280 , id 0x600f12
\ncpu2: package 0, core 5, smt 0
\ncpu3 at mainbus0 apid 3
\ncpu3: AMD Opteron(tm) Processor 3280 , id 0x600f12
\ncpu3: package 0, core 2, smt 0
\ncpu4 at mainbus0 apid 4
\ncpu4: AMD Opteron(tm) Processor 3280 , id 0x600f12
\ncpu4: package 0, core 4, smt 0
\ncpu5 at mainbus0 apid 5
\ncpu5: AMD Opteron(tm) Processor 3280 , id 0x600f12
\ncpu5: package 0, core 1, smt 0
\ncpu6 at mainbus0 apid 6
\ncpu6: AMD Opteron(tm) Processor 3280 , id 0x600f12
\ncpu6: package 0, core 6, smt 0
\ncpu7 at mainbus0 apid 7
\ncpu7: AMD Opteron(tm) Processor 3280 , id 0x600f12
\ncpu7: package 0, core 7, smt 0
\nacpi0 at mainbus0: Intel ACPICA 20170303
\nacpi0: X\/RSDT: OemId <GBT ,GBTUACPI,42302e31>, AslId <GBTU,01010101>
\nacpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
\nacpi0: SCI interrupting at int 9
\ntimecounter: Timecounter “ACPI-Fast” frequency 3579545 Hz quality 1000
\nhpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
\ntimecounter: Timecounter “hpet0” frequency 14318180 Hz quality 2000
\nacpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
\nSYSR (PNP0C02) at acpi0 not configured
\nPMIO (PNP0C02) at acpi0 not configured
\nattimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
\npcppi1 at acpi0 (SPKR, PNP0800): io 0x61
\nspkr0 at pcppi1: PC Speaker
\nmidi0 at pcppi1: PC speaker
\nsysbeep0 at pcppi1
\nacpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
\nacpiwmibus at acpiwmi0 not configured
\nUAR1 (PNP0501) at acpi0 not configured
\nEXPL (PNP0C02) at acpi0 not configured
\nMEM (PNP0C01) at acpi0 not configured
\nacpiwmi1 at acpi0 (AOD, PNP0C14-0): ACPI WMI Interface
\nacpiwmibus at acpiwmi1 not configured
\nattimer1: attached to pcppi1
\npci0 at mainbus0 bus 0: configuration mode 1
\npci0: i\/o space, memory space enabled, rd\/line, rd\/mult, wr\/inv ok
\npchb0 at pci0 dev 0 function 0: vendor 1002 product 5a14 (rev. 0x02)
\nppb0 at pci0 dev 2 function 0: vendor 1002 product 5a16 (rev. 0x00)
\nppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT\/s
\nppb0: link is x8 @ 5.0GT\/s
\npci1 at ppb0 bus 1
\npci1: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nvga0 at pci1 dev 0 function 0: vendor 1002 product 67ef (rev. 0xcf)
\nwsdisplay0 at vga0 kbdmux 1: console (80×25, vt100 emulation)
\nwsmux1: connecting to wsdisplay0
\ndrm at vga0 not configured
\nhdaudio0 at pci1 dev 0 function 1: HD Audio Controller
\nhdaudio0: interrupting at ioapic0 pin 19
\nhdafg0 at hdaudio0: vendor 1002 product aa01
\nhdafg0: HDMI00 2ch: Digital Out [Jack]\nhdafg0: HDMI01 2ch: Digital Out [Jack]\nhdafg0: HDMI02 2ch: Digital Out [Jack]\nhdafg0: HDMI03 2ch: Digital Out [Jack]\nhdafg0: HDMI04 2ch: Digital Out [Jack]\nhdafg0: 2ch\/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
\nppb1 at pci0 dev 4 function 0: vendor 1002 product 5a18 (rev. 0x00)
\nppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 5.0GT\/s
\nppb1: link is x1 @ 5.0GT\/s
\npci2 at ppb1 bus 2
\npci2: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nxhci0 at pci2 dev 0 function 0: vendor 1b6f product 7023 (rev. 0x01)
\nxhci0: interrupting at ioapic0 pin 16
\nxhci0: xHCI version 1.0
\nusb0 at xhci0: USB revision 3.0
\nusb1 at xhci0: USB revision 2.0
\nppb2 at pci0 dev 9 function 0: vendor 1002 product 5a1c (rev. 0x00)
\nppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT\/s
\nppb2: link is x1 @ 2.5GT\/s
\npci3 at ppb2 bus 3
\npci3: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nre0 at pci3 dev 0 function 0: RealTek 8168\/8111 PCIe Gigabit Ethernet (rev. 0x06)
\nre0: interrupting at ioapic0 pin 17
\nre0: Ethernet address
\nre0: using 256 tx descriptors
\nrgephy0 at re0 phy 7: RTL8169S\/8110S\/8211 1000BASE-T media interface, rev. 5
\nrgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
\nppb3 at pci0 dev 10 function 0: vendor 1002 product 5a1d (rev. 0x00)
\nppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT\/s
\npci4 at ppb3 bus 4
\npci4: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nxhci1 at pci4 dev 0 function 0: vendor 1b6f product 7023 (rev. 0x01)
\nxhci1: interrupting at ioapic0 pin 18
\nxhci1: xHCI version 1.0
\nusb2 at xhci1: USB revision 3.0
\nusb3 at xhci1: USB revision 2.0
\nahcisata0 at pci0 dev 17 function 0: vendor 1002 product 4393 (rev. 0x40)
\nahcisata0: interrupting at ioapic0 pin 19
\nahcisata0: 64-bit DMA
\nahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 0xf732ff05<PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
\natabus0 at ahcisata0 channel 0
\natabus1 at ahcisata0 channel 1
\natabus2 at ahcisata0 channel 2
\natabus3 at ahcisata0 channel 3
\natabus4 at ahcisata0 channel 4
\natabus5 at ahcisata0 channel 5
\nohci0 at pci0 dev 18 function 0: vendor 1002 product 4397 (rev. 0x00)
\nohci0: interrupting at ioapic0 pin 18
\nohci0: OHCI version 1.0, legacy support
\nusb4 at ohci0: USB revision 1.0
\nehci0 at pci0 dev 18 function 2: vendor 1002 product 4396 (rev. 0x00)
\nehci0: interrupting at ioapic0 pin 17
\nehci0: dropped intr workaround enabled
\nehci0: EHCI version 1.0
\nehci0: companion controller, 5 ports each: ohci0
\nusb5 at ehci0: USB revision 2.0
\nohci1 at pci0 dev 19 function 0: vendor 1002 product 4397 (rev. 0x00)
\nohci1: interrupting at ioapic0 pin 18
\nohci1: OHCI version 1.0, legacy support
\nusb6 at ohci1: USB revision 1.0
\nehci1 at pci0 dev 19 function 2: vendor 1002 product 4396 (rev. 0x00)
\nehci1: interrupting at ioapic0 pin 17
\nehci1: dropped intr workaround enabled
\nehci1: EHCI version 1.0
\nehci1: companion controller, 5 ports each: ohci1
\nusb7 at ehci1: USB revision 2.0
\npiixpm0 at pci0 dev 20 function 0: vendor 1002 product 4385 (rev. 0x42)
\npiixpm0: polling (SB800)
\niic0 at piixpm0: I2C bus
\niic1 at piixpm0: I2C bus
\niic2 at piixpm0: I2C bus
\niic3 at piixpm0: I2C bus
\nhdaudio1 at pci0 dev 20 function 2: HD Audio Controller
\nhdaudio1: interrupting at ioapic0 pin 16
\nhdafg1 at hdaudio1: vendor 10ec product 0889
\nhdafg1: DAC00 8ch: Speaker [Jack]\nhdafg1: DAC01 2ch: HP Out [Jack]\nhdafg1: DIG02 2ch: SPDIF Out [Jack]\nhdafg1: DIG03 2ch: SPDIF Out [Built-In]\nhdafg1: ADC04 2ch: Line In [Jack], Mic In [Jack]\nhdafg1: ADC05 2ch: Mic In [Jack]\nhdafg1: 8ch\/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
\naudio0 at hdafg1: full duplex, playback, capture, mmap, independent
\nhdafg1: Virtual format configured – Format SLINEAR, precision 16, channels 2, frequency 48000
\nspkr1 at audio0: PC Speaker (synthesized)
\npcib0 at pci0 dev 20 function 3: vendor 1002 product 439d (rev. 0x40)
\nppb4 at pci0 dev 20 function 4: vendor 1002 product 4384 (rev. 0x40)
\npci5 at ppb4 bus 5
\npci5: i\/o space, memory space enabled
\nohci2 at pci0 dev 20 function 5: vendor 1002 product 4399 (rev. 0x00)
\nohci2: interrupting at ioapic0 pin 18
\nohci2: OHCI version 1.0, legacy support
\nusb8 at ohci2: USB revision 1.0
\nppb5 at pci0 dev 21 function 0: vendor 1002 product 43a0 (rev. 0x00)
\nppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 2.5GT\/s
\npci6 at ppb5 bus 6
\npci6: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nohci3 at pci0 dev 22 function 0: vendor 1002 product 4397 (rev. 0x00)
\nohci3: interrupting at ioapic0 pin 18
\nohci3: OHCI version 1.0, legacy support
\nusb9 at ohci3: USB revision 1.0
\nehci2 at pci0 dev 22 function 2: vendor 1002 product 4396 (rev. 0x00)
\nehci2: interrupting at ioapic0 pin 17
\nehci2: dropped intr workaround enabled
\nehci2: EHCI version 1.0
\nehci2: companion controller, 4 ports each: ohci3
\nusb10 at ehci2: USB revision 2.0
\npchb1 at pci0 dev 24 function 0: vendor 1022 product 1600 (rev. 0x00)
\npchb2 at pci0 dev 24 function 1: vendor 1022 product 1601 (rev. 0x00)
\npchb3 at pci0 dev 24 function 2: vendor 1022 product 1602 (rev. 0x00)
\namdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
\namdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family15h)
\npchb4 at pci0 dev 24 function 4: vendor 1022 product 1604 (rev. 0x00)
\npchb5 at pci0 dev 24 function 5: vendor 1022 product 1605 (rev. 0x00)
\nisa0 at pcib0
\ncom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
\npckbc0 at isa0 port 0x60-0x64
\nacpicpu0 at cpu0: ACPI CPU
\nacpicpu0: C1: HLT, lat 0 us, pow 0 mW
\nacpicpu0: C2: I\/O, lat 100 us, pow 0 mW
\nacpicpu0: P0: FFH, lat 4 us, pow 7087 mW, 2400 MHz
\nacpicpu0: P1: FFH, lat 4 us, pow 5678 mW, 2100 MHz
\nacpicpu0: P2: FFH, lat 4 us, pow 4902 mW, 1900 MHz
\nacpicpu0: P3: FFH, lat 4 us, pow 4050 mW, 1600 MHz
\nacpicpu0: P4: FFH, lat 4 us, pow 3500 mW, 1400 MHz
\nacpicpu1 at cpu1: ACPI CPU
\nacpicpu2 at cpu2: ACPI CPU
\nacpicpu3 at cpu3: ACPI CPU
\nacpicpu4 at cpu4: ACPI CPU
\nacpicpu5 at cpu5: ACPI CPU
\nacpicpu6 at cpu6: ACPI CPU
\nacpicpu7 at cpu7: ACPI CPU
\ntimecounter: Timecounter “clockinterrupt” frequency 100 Hz quality 0
\nERROR: 1243 cycle TSC drift observed
\nuhub0 at usb0: vendor 1b6f (0x1b6f) xHCI Root Hub (0000), class 9\/0, rev 1.00\/1.00, addr 0
\nuhub0: 2 ports with 2 removable, self powered
\nuhub1 at usb1: vendor 1b6f (0x1b6f) xHCI Root Hub (0000), class 9\/0, rev 2.00\/1.00, addr 0
\nuhub1: 2 ports with 2 removable, self powered
\nuhub2 at usb2: vendor 1b6f (0x1b6f) xHCI Root Hub (0000), class 9\/0, rev 1.00\/1.00, addr 0
\nuhub2: 2 ports with 2 removable, self powered
\nuhub3 at usb3: vendor 1b6f (0x1b6f) xHCI Root Hub (0000), class 9\/0, rev 2.00\/1.00, addr 0
\nuhub3: 2 ports with 2 removable, self powered
\nIPsec: Initialized Security Association Processing.
\nuhub4 at usb4: vendor 1002 (0x1002) OHCI root hub (0000), class 9\/0, rev 1.00\/1.00, addr 1
\nuhub4: 5 ports with 5 removable, self powered
\nuhub5 at usb5: vendor 1002 (0x1002) EHCI root hub (0000), class 9\/0, rev 2.00\/1.00, addr 1
\nuhub5: 5 ports with 5 removable, self powered
\nuhub6 at usb6: vendor 1002 (0x1002) OHCI root hub (0000), class 9\/0, rev 1.00\/1.00, addr 1
\nuhub6: 5 ports with 5 removable, self powered
\nuhub7 at usb7: vendor 1002 (0x1002) EHCI root hub (0000), class 9\/0, rev 2.00\/1.00, addr 1
\nuhub7: 5 ports with 5 removable, self powered
\nahcisata0 port 0: device present, speed: 6.0Gb\/s
\nahcisata0 port 1: device present, speed: 6.0Gb\/s
\nahcisata0 port 3: device present, speed: 6.0Gb\/s
\nuhub8 at usb9: vendor 1002 (0x1002) OHCI root hub (0000), class 9\/0, rev 1.00\/1.00, addr 1
\nuhub8: 4 ports with 4 removable, self powered
\nuhub9 at usb8: vendor 1002 (0x1002) OHCI root hub (0000), class 9\/0, rev 1.00\/1.00, addr 1
\nuhub9: 2 ports with 2 removable, self powered
\nuhub10 at usb10: vendor 1002 (0x1002) EHCI root hub (0000), class 9\/0, rev 2.00\/1.00, addr 1
\nuhub10: 4 ports with 4 removable, self powered
\numass0 at uhub0 port 2 configuration 1 interface 0
\numass0: Western Digital (0x1058) Elements 10A8 (0x10a8), rev 3.00\/10.42, addr 1
\numass0: using SCSI over Bulk-Only
\nscsibus0 at umass0: 2 targets, 1 lun per target
\nsd0 at scsibus0 target 0 lun 0: <WD, Elements 10A8, 1042> disk fixed
\nsd0: fabricating a geometry
\nsd0: 931 GB, 953837 cyl, 64 head, 32 sec, 512 bytes\/sect x 1953458176 sectors
\nsd0: fabricating a geometry
\nwd0 at atabus0 drive 0
\nwd0: <ST3000DM001-1CH166>
\nwd0: drive supports 16-sector PIO transfers, LBA48 addressing
\nwd0: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes\/sect x 5860533168 sectors
\nwd0: GPT GUID: 3954a983-ae2c-44b4-929a-a6f25b77cd1b
\ndk0 at wd0: “primary”, 5860530176 blocks at 2048, type: <unknown>
\nwd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133)
\nwd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133) (using DMA)
\nwd1 at atabus1 drive 0
\nwd1: <KINGSTON SHFS37A240G>
\nwd1: drive supports 1-sector PIO transfers, LBA48 addressing
\nwd1: 223 GB, 465141 cyl, 16 head, 63 sec, 512 bytes\/sect x 468862128 sectors
\nwd1: GPT GUID: 54bf64e1-f1ab-40a7-b301-8c0d7b79e0bd
\ndk1 at wd1: “ec012448-ea24-483b-9df7-c75d116554b1”, 3906 blocks at 2048, type: <unknown>
\ndk2 at wd1: “965a3f24-5b87-4690-b0e0-2a1e9d629608”, 468854974 blocks at 5954, type: msdos
\nwd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133)
\nwd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133) (using DMA)
\nwd2 at atabus3 drive 0
\nwd2: <Hitachi HDS723030ALA640>
\nwd2: drive supports 16-sector PIO transfers, LBA48 addressing
\nwd2: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes\/sect x 5860533168 sectors
\nwd2: GPT GUID: 77d45cf4-beea-49d1-8a3c-93cd7b929ea4
\ndk3 at wd2: “bb03467d-8bf9-47f8-a3b4-796c7946e9f1”, 5860533101 blocks at 34, type: <unknown>
\nwd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133)
\nwd2(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133) (using DMA)
\nuhub11 at uhub7 port 5: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class 9\/0, rev 2.00\/9.01, addr 2
\nuhub11: single transaction translator
\nuhub11: 4 ports with 4 removable, self powered
\nubt0 at uhub4 port 1
\nubt0: vendor 0a12 (0xa12) Bluetooth2.1+EDR CLASS1 (0x01), rev 2.00\/52.76, addr 2
\nuhidev0 at uhub11 port 3 configuration 1 interface 0
\nuhidev0: USB (0x1c4f) USB Keykoard (0x02), rev 1.10\/1.10, addr 3, iclass 3\/1
\nukbd0 at uhidev0
\nwskbd0 at ukbd0: console keyboard, using wsdisplay0
\nuhidev1 at uhub11 port 3 configuration 1 interface 1
\nuhidev1: USB (0x1c4f) USB Keykoard (0x02), rev 1.10\/1.10, addr 3, iclass 3\/0
\nuhidev1: 2 report ids
\nuhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
\nuhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
\nuhidev2 at uhub11 port 4 configuration 1 interface 0
\nuhidev2: Kensington (0x47d) Kensington USB\/PS2 Orbit (0x1022), rev 1.10\/4.00, addr 4, iclass 3\/1
\nums0 at uhidev2: 2 buttons
\nwsmouse0 at ums0 mux 0
\npad0: outputs: 44100Hz, 16-bit, stereo
\naudio1 at pad0: half duplex, playback, capture, mmap
\npad0: Virtual format configured – Format SLINEAR, precision 16, channels 2, frequency 44100
\nspkr2 at audio1: PC Speaker (synthesized)
\nWARNING: 1 error while detecting hardware; check system log.
\nboot device: sd0
\nroot on sd0a dumps on sd0b
\nroot file system type: ffs
\nkern.module.path=\/stand\/amd64\/8.0\/modules<\/p>\n<\/div>\n

 <\/p>\n

\"\"<\/a>
Mate Desktop 1.18.0 on NetBSD 8 beta<\/figcaption><\/figure>\n

P.S. Ethernet addresses were removed from all dmesg log messages.<\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

I must admit I haven’t been using NetBSD for any serious workloads for years, partially due to personal reasons as I was living abroad for several years. However, I still spend considerable time to keep up to date installations\u00a0(8 beta branch currently) and test it on various hardware including attempts to run it in any … Continue reading NetBSD 8 beta testing<\/span> →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[],"class_list":["post-262","post","type-post","status-publish","format-standard","hentry","category-netbsd"],"_links":{"self":[{"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/posts\/262","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/netbsd.name\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=262"}],"version-history":[{"count":10,"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/posts\/262\/revisions"}],"predecessor-version":[{"id":275,"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/posts\/262\/revisions\/275"}],"wp:attachment":[{"href":"https:\/\/netbsd.name\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=262"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/netbsd.name\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=262"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/netbsd.name\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=262"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}