{"id":37,"date":"2012-05-02T16:05:38","date_gmt":"2012-05-02T14:05:38","guid":{"rendered":"http:\/\/netbsd.name\/?p=37"},"modified":"2014-01-28T20:09:29","modified_gmt":"2014-01-28T18:09:29","slug":"epia-m900-dmesg-output","status":"publish","type":"post","link":"https:\/\/netbsd.name\/?p=37","title":{"rendered":"EPIA-M900 dmesg output"},"content":{"rendered":"<p>NetBSD blog without any dmesg output? This is just boring. Only several months ago I bought VIA EPIA-M900 and it was hanging up on boot at that time. Today I tried it yet again and it booted (later I found that VX900 IDE support was added not so long ago)! Thanks for NetBSD developers. Here you go:<\/p>\n<p><code><code><span class=\"collapseomatic \" id=\"id6ac99874c8ec9\"  tabindex=\"0\" title=\"dmesg\"    >dmesg<\/span><div id=\"target-id6ac99874c8ec9\" class=\"collapseomatic_content \"><\/code><\/code><\/p>\n<p>Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,<br \/>\n2006, 2007, 2008, 2009, 2010, 2011, 2012<br \/>\nThe NetBSD Foundation, Inc.\u00a0 All rights reserved.<br \/>\nCopyright (c) 1982, 1986, 1989, 1991, 1993<br \/>\nThe Regents of the University of California.\u00a0 All rights reserved.<\/p>\n<p>NetBSD 6.0_BETA (GENERIC)<br \/>\ntotal memory = 7423 MB<br \/>\navail memory = 7192 MB<br \/>\ntimecounter: Timecounters tick every 10.000 msec<br \/>\ntimecounter: Timecounter &#8220;i8254&#8221; frequency 1193182 Hz quality 100<br \/>\nVIA technology Inc. VT3410 I2F00MB (410 AMI R102)<br \/>\nmainbus0 (root)<br \/>\ncpu0 at mainbus0 apid 0: VIA Nano X2 L4350 @ 1.6+ GHz, id 0x6fc<br \/>\ncpu1 at mainbus0 apid 2: VIA Nano X2 L4350 @ 1.6+ GHz, id 0x6fc<br \/>\nioapic0 at mainbus0 apid 3: pa 0xfec00000, version 3, 24 pins<br \/>\nioapic1 at mainbus0 apid 4: pa 0xfecc0000, version 3, 24 pins<br \/>\nacpi0 at mainbus0: Intel ACPICA 20110623<br \/>\nacpi0: X\/RSDT: OemId &lt;070111,XSDT1500,20110701&gt;, AslId &lt;MSFT,00000097&gt;<br \/>\nacpi0: SCI interrupting at int 9<br \/>\ntimecounter: Timecounter &#8220;ACPI-Safe&#8221; frequency 3579545 Hz quality 900<br \/>\nhpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)<br \/>\ntimecounter: Timecounter &#8220;hpet0&#8221; frequency 14318180 Hz quality 2000<br \/>\nNBPE (PNP0C01) at acpi0 not configured<br \/>\nattimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43<br \/>\npcppi1 at acpi0 (SPKR, PNP0800): io 0x61<br \/>\nmidi0 at pcppi1: PC speaker<br \/>\nsysbeep0 at pcppi1<br \/>\nUAR1 (PNP0501) at acpi0 not configured<br \/>\nUAR2 (PNP0501) at acpi0 not configured<br \/>\nUAR3 (PNP0501) at acpi0 not configured<br \/>\nUAR4 (PNP0501) at acpi0 not configured<br \/>\nSIOR (PNP0C02) at acpi0 not configured<br \/>\nRMSC (PNP0C02) at acpi0 not configured<br \/>\npckbc1 at acpi0 (PS2M, PNP0F03) (aux port): io 0x60,0x64 irq 12<br \/>\nOMSC (PNP0C02) at acpi0 not configured<br \/>\nacpiacad0 at acpi0 (ACDP, ACPI0003): ACPI AC Adapter<br \/>\nPCIE (PNP0C02) at acpi0 not configured<br \/>\nacpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button<br \/>\nRMEM (PNP0C01) at acpi0 not configured<br \/>\nacpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button<br \/>\nacpiwdrt0 at acpi0: mem 0xfed01000,0xfed01004<br \/>\nacpiwdrt0: watchdog interval 1-1023 sec.<br \/>\nattimer1: attached to pcppi1<br \/>\npci0 at mainbus0 bus 0: configuration mode 1<br \/>\npci0: i\/o space, memory space enabled, rd\/line, rd\/mult, wr\/inv ok<br \/>\npchb0 at pci0 dev 0 function 0: vendor 0x1106 product 0x0410 (rev. 0x80)<br \/>\npchb1 at pci0 dev 0 function 1: vendor 0x1106 product 0x1410 (rev. 0x00)<br \/>\npchb2 at pci0 dev 0 function 2: vendor 0x1106 product 0x2410 (rev. 0x00)<br \/>\npchb3 at pci0 dev 0 function 3: vendor 0x1106 product 0x3410 (rev. 0x00)<br \/>\npchb4 at pci0 dev 0 function 4: vendor 0x1106 product 0x4410 (rev. 0x00)<br \/>\npchb5 at pci0 dev 0 function 5: vendor 0x1106 product 0x5410 (rev. 0x00)<br \/>\npchb6 at pci0 dev 0 function 6: vendor 0x1106 product 0x6410 (rev. 0x00)<br \/>\npchb7 at pci0 dev 0 function 7: vendor 0x1106 product 0x7410 (rev. 0x00)<br \/>\nppb0 at pci0 dev 3 function 0: vendor 0x1106 product 0xa410 (rev. 0x00)<br \/>\nppb0: PCI Express 2.0 &lt;Root Port of PCI-E Root Complex&gt;<br \/>\npci1 at ppb0 bus 1<br \/>\npci1: i\/o space, memory space enabled, rd\/line, wr\/inv ok<br \/>\nvga0 at pci1 dev 0 function 0: vendor 0x5333 product 0x9060 (rev. 0x01)<br \/>\nwsdisplay0 at vga0 kbdmux 1: console (80&#215;25, vt100 emulation)<br \/>\nwsmux1: connecting to wsdisplay0<br \/>\ndrm at vga0 not configured<br \/>\nhdaudio0 at pci1 dev 0 function 1: HD Audio Controller<br \/>\nhdaudio0: interrupting at ioapic1 pin 1<br \/>\nhdafg0 at hdaudio0: vendor 5333 product 1111<br \/>\nhdafg0: HDMI00 2ch: Digital Out [Built-In]\nhdafg0: 2ch\/0ch 48000Hz PCM16 AC3<br \/>\nhdafg1 at hdaudio0: vendor 5333 product 1111<br \/>\nhdafg1: HDMI00 2ch: Digital Out [Built-In]\nhdafg1: 2ch\/0ch 48000Hz PCM16 AC3<br \/>\nppb1 at pci0 dev 3 function 1: vendor 0x1106 product 0xb410 (rev. 0x00)<br \/>\nppb1: PCI Express 2.0 &lt;Root Port of PCI-E Root Complex&gt;<br \/>\npci2 at ppb1 bus 2<br \/>\npci2: i\/o space, memory space enabled, rd\/line, wr\/inv ok<br \/>\nppb2 at pci0 dev 3 function 2: vendor 0x1106 product 0xc410 (rev. 0x00)<br \/>\nppb2: PCI Express 2.0 &lt;Root Port of PCI-E Root Complex&gt;<br \/>\npci3 at ppb2 bus 3<br \/>\npci3: i\/o space, memory space enabled, rd\/line, wr\/inv ok<br \/>\nppb3 at pci0 dev 3 function 3: vendor 0x1106 product 0xd410 (rev. 0x00)<br \/>\nppb3: PCI Express 2.0 &lt;Root Port of PCI-E Root Complex&gt;<br \/>\npci4 at ppb3 bus 5<br \/>\npci4: i\/o space, memory space enabled, rd\/line, wr\/inv ok<br \/>\nvge0 at pci4 dev 0 function 0: VIA VT612X Gigabit Ethernet (rev. 0x82)<br \/>\nvge0: interrupting at ioapic1 pin 12<br \/>\nvge0: Ethernet address:<br \/>\nukphy0 at vge0 phy 22: OUI 0x0009c3, model 0x0019, rev. 0<br \/>\nukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto<br \/>\npchb8 at pci0 dev 3 function 4: vendor 0x1106 product 0xe410 (rev. 0x00)<br \/>\nviaide0 at pci0 dev 15 function 0<br \/>\nviaide0: VIA Technologies VX900 ATA133 controller<br \/>\nviaide0: bus-master DMA support present<br \/>\nviaide0: primary channel configured to native-PCI mode<br \/>\nviaide0: using ioapic0 pin 21 for native-PCI interrupt<br \/>\natabus0 at viaide0 channel 0<br \/>\nviaide0: secondary channel configured to native-PCI mode<br \/>\natabus1 at viaide0 channel 1<br \/>\nuhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0xa0)<br \/>\nuhci0: interrupting at ioapic0 pin 20<br \/>\nusb0 at uhci0: USB revision 1.0<br \/>\nuhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0xa0)<br \/>\nuhci1: interrupting at ioapic0 pin 22<br \/>\nusb1 at uhci1: USB revision 1.0<br \/>\nuhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0xa0)<br \/>\nuhci2: interrupting at ioapic0 pin 21<br \/>\nusb2 at uhci2: USB revision 1.0<br \/>\nuhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0xa0)<br \/>\nuhci3: interrupting at ioapic0 pin 23<br \/>\nusb3 at uhci3: USB revision 1.0<br \/>\nehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x90)<br \/>\nehci0: interrupting at ioapic0 pin 23<br \/>\nehci0: dropped intr workaround enabled<br \/>\nehci0: EHCI version 1.0<br \/>\nehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3<br \/>\nusb4 at ehci0: USB revision 2.0<br \/>\npcib0 at pci0 dev 17 function 0: vendor 0x1106 product 0x8410 (rev. 0x00)<br \/>\npchb9 at pci0 dev 17 function 7: vendor 0x1106 product 0xa353 (rev. 0x00)<br \/>\nppb4 at pci0 dev 19 function 0: vendor 0x1106 product 0xb353 (rev. 0x00)<br \/>\npci5 at ppb4 bus 6<br \/>\npci5: i\/o space, memory space enabled<br \/>\nhdaudio1 at pci0 dev 20 function 0: HD Audio Controller<br \/>\nhdaudio1: interrupting at ioapic0 pin 17<br \/>\nhdafg2 at hdaudio1: VIA VT2020<br \/>\nhdafg2: DAC00 2ch: Speaker [Jack], HP Out [Jack]\nhdafg2: ADC01 2ch: Line In [Jack], Mic In [Jack]\nhdafg2: DIG02 2ch: SPDIF Out [Jack]\nhdafg2: 2ch\/2ch 48000Hz PCM16*<br \/>\naudio0 at hdafg2: full duplex, playback, capture, independent<br \/>\nisa0 at pcib0<br \/>\ncom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo<br \/>\ncom1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo<br \/>\npckbc0 at isa0 port 0x60-0x64<br \/>\nacpicpu0 at cpu0: ACPI CPU<br \/>\nacpicpu0: C1: HLT, lat\u00a0\u00a0 0 us, pow\u00a0\u00a0\u00a0\u00a0 0 mW<br \/>\nacpicpu1 at cpu1: ACPI CPU<br \/>\ntimecounter: Timecounter &#8220;clockinterrupt&#8221; frequency 100 Hz quality 0<br \/>\nacpiacad0: AC adapter online.<br \/>\nwd0 at atabus0 drive 0<br \/>\nwd0: &lt;KINGSTON SVP200S3120G&gt;<br \/>\nwd0: drive supports 16-sector PIO transfers, LBA48 addressing<br \/>\nwd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes\/sect x 234441648 sectors<br \/>\nuhub0 at usb0: vendor 0x1106 UHCI root hub, class 9\/0, rev 1.00\/1.00, addr 1<br \/>\nuhub0: 2 ports with 2 removable, self powered<br \/>\nuhub1 at usb1: vendor 0x1106 UHCI root hub, class 9\/0, rev 1.00\/1.00, addr 1<br \/>\nuhub1: 2 ports with 2 removable, self powered<br \/>\nuhub2 at usb2: vendor 0x1106 UHCI root hub, class 9\/0, rev 1.00\/1.00, addr 1<br \/>\nuhub2: 2 ports with 2 removable, self powered<br \/>\nuhub3 at usb3: vendor 0x1106 UHCI root hub, class 9\/0, rev 1.00\/1.00, addr 1<br \/>\nuhub3: 2 ports with 2 removable, self powered<br \/>\nuhub4 at usb4: vendor 0x1106 EHCI root hub, class 9\/0, rev 2.00\/1.00, addr 1<br \/>\nuhub4: 8 ports with 8 removable, self powered<br \/>\nwd0: 32-bit data port<br \/>\nwd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133)<br \/>\nwd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra\/133) (using DMA)<br \/>\numass0 at uhub4 port 2 configuration 1 interface 0<br \/>\numass0: JMicron JM20336 SATA, USB Combo, rev 2.00\/1.00, addr 2<br \/>\numass0: using SCSI over Bulk-Only<br \/>\nscsibus0 at umass0: 2 targets, 1 lun per target<br \/>\ncd0 at scsibus0 target 0 lun 0: &lt;HL-DT-ST, DVDRAM GT20N, CQ02&gt; cdrom removable<br \/>\nuhub5 at uhub4 port 3: vendor 0x0424 product 0x2504, class 9\/0, rev 2.00\/0.01, addr 3<br \/>\nuhub5: multiple transaction translators<br \/>\nuhub5: 2 ports with 2 removable, self powered<br \/>\numass1 at uhub5 port 1 configuration 1 interface 0<br \/>\numass1: vendor 0x13fe silicon-power, rev 2.00\/1.10, addr 4<br \/>\numass1: using SCSI over Bulk-Only<br \/>\nscsibus1 at umass1: 2 targets, 1 lun per target<br \/>\nsd0 at scsibus1 target 0 lun 0: &lt;, silicon-power, PMAP&gt; disk removable<br \/>\nsd0: 3822 MB, 7644 cyl, 32 head, 32 sec, 512 bytes\/sect x 7827456 sectors<br \/>\nubt0 at uhub5 port 2<br \/>\nubt0: vendor 0x0a12 Bluetooth2.1+EDR CLASS1, rev 2.00\/52.76, addr 5<br \/>\nehci0: handing over low speed device on port 4 to uhci1<br \/>\nehci0: handing over low speed device on port 5 to uhci2<br \/>\nehci0: handing over full speed device on port 7 to uhci3<br \/>\nuhidev0 at uhub1 port 2 configuration 1 interface 0<br \/>\nuhidev0: vendor 0x13ba Generic USB K\/B, rev 1.10\/0.01, addr 2, iclass 3\/1<br \/>\nukbd0 at uhidev0: 8 modifier keys, 6 key codes<br \/>\nuhidev1 at uhub2 port 1 configuration 1 interface 0<br \/>\nuhidev1: Logitech USB Optical Mouse, rev 2.00\/27.20, addr 2, iclass 3\/1<br \/>\nums0 at uhidev1: 8 buttons, W and Z dirs<br \/>\nwsmouse0 at ums0 mux 0<br \/>\nwskbd0 at ukbd0: console keyboard, using wsdisplay0<br \/>\nuhidev2 at uhub1 port 2 configuration 1 interface 1<br \/>\nuhidev2: vendor 0x13ba Generic USB K\/B, rev 1.10\/0.01, addr 2, iclass 3\/1<br \/>\nuhidev2: 2 report ids<br \/>\nums1 at uhidev2 reportid 1: 3 buttons and Z dir<br \/>\nwsmouse1 at ums1 mux 0<br \/>\nuhid0 at uhidev2 reportid 2: input=1, output=0, feature=0<br \/>\nuvideo0 at uhub4 port 8 configuration 1 interface 0: vendor 0x046d product 0x0824, rev 2.00\/0.10, addr 6<br \/>\nvideo0 at uvideo0: vendor 0x046d product 0x0824, rev 2.00\/0.10, addr 6<br \/>\nuaudio0 at uhub4 port 8 configuration 1 interface 2<br \/>\nuaudio0: vendor 0x046d product 0x0824, rev 2.00\/0.10, addr 6<br \/>\nuaudio0: audio rev 1.00<br \/>\naudio1 at uaudio0: full duplex, playback, capture, independent<br \/>\nKernelized RAIDframe activated<br \/>\npad0: outputs: 44100Hz, 16-bit, stereo<br \/>\naudio2 at pad0: half duplex, playback, capture<br \/>\nboot device: cd0<br \/>\nroot on cd0a dumps on cd0b<br \/>\nulpt0 at uhub3 port 1 configuration 1 interface 1<br \/>\nulpt0: HP PSC 2350 series, rev 2.00\/1.00, addr 2, iclass 7\/1<br \/>\nulpt0: using bi-directional mode<br \/>\numass2 at uhub3 port 1 configuration 1 interface 3<br \/>\numass2: HP PSC 2350 series, rev 2.00\/1.00, addr 2<br \/>\numass2: using SCSI over Bulk-Only<br \/>\nscsibus2 at umass2: 2 targets, 1 lun per target<br \/>\nsd1 at scsibus2 target 0 lun 0: &lt;HP, PSC 2355, 1.00&gt; disk removable<br \/>\nsd1: drive offline<br \/>\nsd1: unable to open device, error = 19<br \/>\nroot file system type: cd9660<br \/>\nwarning: no \/dev\/console<\/p>\n<p><code><code><\/code><code><code><\/div><\/code><\/code><\/code><\/p>\n","protected":false},"excerpt":{"rendered":"<p>NetBSD blog without any dmesg output? This is just boring. Only several months ago I bought VIA EPIA-M900 and it was hanging up on boot at that time. Today I tried it yet again and it booted (later I found that VX900 IDE support was added not so long ago)! Thanks for NetBSD developers. Here &hellip; <a href=\"https:\/\/netbsd.name\/?p=37\" class=\"more-link\">Continue reading <span class=\"screen-reader-text\">EPIA-M900 dmesg output<\/span> <span class=\"meta-nav\">&rarr;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[],"class_list":["post-37","post","type-post","status-publish","format-standard","hentry","category-netbsd"],"_links":{"self":[{"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/posts\/37","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/netbsd.name\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=37"}],"version-history":[{"count":7,"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/posts\/37\/revisions"}],"predecessor-version":[{"id":182,"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/posts\/37\/revisions\/182"}],"wp:attachment":[{"href":"https:\/\/netbsd.name\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=37"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/netbsd.name\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=37"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/netbsd.name\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=37"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}