{"id":391,"date":"2019-08-17T16:21:32","date_gmt":"2019-08-17T14:21:32","guid":{"rendered":"https:\/\/netbsd.name\/?p=391"},"modified":"2019-08-17T16:21:58","modified_gmt":"2019-08-17T14:21:58","slug":"updated-to-netbsd-9-branch","status":"publish","type":"post","link":"https:\/\/netbsd.name\/?p=391","title":{"rendered":"Updated to NetBSD 9 branch"},"content":{"rendered":"\n

At the end of July I decided to downgrade my graphics card from Radeon RX 460 to Radeon R7 3<\/em>70 (which is performance wise similar card) for better NetBSD compatibility and ability to build NetBSD desktop. It almost coincided with the creation of NetBSD 9 branch which should serve the basis of my desktop system (though current branch will always be followed too in one way or another). However, my upgrade was delayed because unexpected reasons, up until time of writing github<\/a> and fossil<\/a> repositories are not synchronized with CVS because of some hardware issues and my alternative resource from IIJ-NetBSD<\/a> netbsd-src git repository imported netbsd-9 branch just recently. Since they have it now, I finally upgraded the system, as well as updated to the latest packages from pkgsrc current. It worked as expected since I was following current branch up until the branch was created and there were not much room for surprises left. R7 370 has a support in radeon drm driver, was detected correctly and works quite nicely with MATE 1.22.1 Desktop Environment. So I hope to evolve my project and see how much limitations I will hit in my daily usage (because of missing\/badly ported software as example). If results will satisfy me, the NetBSD may become my main desktop operating system. You can check dmesg below:<\/p>\n\n\nNetBSD 9.0 BETA on Ryzen 5 1600<\/span>

\nCopyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
\n2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
\n2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
\nCopyright (c) 1982, 1986, 1989, 1991, 1993
\nThe Regents of the University of California. All rights reserved.<\/p>\n

NetBSD 9.0_BETA (GENERIC) #1: Sat Aug 17 00:25:49 EEST 2019
\n\tandriusv@localhost:\/home\/andriusv\/netbsd-src-git\/sys\/arch\/amd64\/compile\/GENERIC
\ntotal memory = 32719 MB
\navail memory = 31739 MB
\ncpu_rng: RDSEED
\nrnd: seeded with 128 bits
\nWARNING: ZFS on NetBSD is under development
\nZFS filesystem version: 5
\ntimecounter: Timecounters tick every 10.000 msec
\nKernelized RAIDframe activated
\nrunning cgd selftest aes-xts-256 aes-xts-512 done
\ntimecounter: Timecounter “i8254” frequency 1193182 Hz quality 100
\nBIOSTAR Group X370GT5 ( )
\nmainbus0 (root)
\nACPI: RSDP 0x00000000000F05A0 000024 (v02 ALASKA)
\nACPI: XSDT 0x00000000DC4AB0A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
\nACPI: FACP 0x00000000DC4B03E8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
\nACPI: DSDT 0x00000000DC4AB208 0051E0 (v02 ALASKA A M I 01072009 INTL 20120913)
\nACPI: FACS 0x00000000DC547E00 000040
\nACPI: APIC 0x00000000DC4B0500 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
\nACPI: FPDT 0x00000000DC4B05E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
\nACPI: FIDT 0x00000000DC4B0628 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
\nACPI: SSDT 0x00000000DC4B06C8 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
\nACPI: SSDT 0x00000000DC4B0790 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
\nACPI: SSDT 0x00000000DC4B9428 002FB6 (v01 AMD AMD AOD 00000001 INTL 20120913)
\nACPI: MCFG 0x00000000DC4BC3E0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
\nACPI: BHMB 0x00000000DC4BC420 000474 (v01 ALASKA A M I 00000001 AMI 00000001)
\nACPI: HPET 0x00000000DC4BC898 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
\nACPI: SSDT 0x00000000DC4BC8D0 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
\nACPI: UEFI 0x00000000DC4BC8F8 000042 (v01 ALASKA A M I 00000002 01000013)
\nACPI: TPM2 0x00000000DC4BC940 000038 (v04 ALASKA A M I 00000001 AMI 00000000)
\nACPI: IVRS 0x00000000DC4BC978 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
\nACPI: SSDT 0x00000000DC4BCA48 001A58 (v01 AMD AMD CPU 00000001 AMD 00000001)
\nACPI: CRAT 0x00000000DC4BE4A0 000BD0 (v01 AMD AMD CRAT 00000001 AMD 00000001)
\nACPI: CDIT 0x00000000DC4BF070 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
\nACPI: SSDT 0x00000000DC4BF0A0 001CE5 (v01 AMD AmdTable 00000001 INTL 20120913)
\nACPI: SSDT 0x00000000DC4C0D88 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
\nACPI: WSMT 0x00000000DC4C0E48 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
\nACPI: SSDT 0x00000000DC4C0E70 0010AF (v01 AMD AmdTable 00000001 INTL 20120913)
\nACPI: 9 ACPI AML tables successfully acquired and loaded
\nioapic0 at mainbus0 apid 13: pa 0xfec00000, version 0x21, 24 pins
\nioapic1 at mainbus0 apid 14: pa 0xfec01000, version 0x21, 32 pins
\ncpu0 at mainbus0 apid 0
\ncpu0: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
\ncpu0: package 0, core 0, smt 0
\ncpu1 at mainbus0 apid 2
\ncpu1: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
\ncpu1: package 0, core 1, smt 0
\ncpu2 at mainbus0 apid 4
\ncpu2: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
\ncpu2: package 0, core 2, smt 0
\ncpu3 at mainbus0 apid 8
\ncpu3: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
\ncpu3: package 0, core 4, smt 0
\ncpu4 at mainbus0 apid 10
\ncpu4: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
\ncpu4: package 0, core 5, smt 0
\ncpu5 at mainbus0 apid 12
\ncpu5: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
\ncpu5: package 0, core 6, smt 0
\ncpu6 at mainbus0 apid 1
\ncpu6: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
\ncpu6: package 0, core 0, smt 1
\ncpu7 at mainbus0 apid 3
\ncpu7: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
\ncpu7: package 0, core 1, smt 1
\ncpu8 at mainbus0 apid 5
\ncpu8: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
\ncpu8: package 0, core 2, smt 1
\ncpu9 at mainbus0 apid 9
\ncpu9: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
\ncpu9: package 0, core 4, smt 1
\ncpu10 at mainbus0 apid 11
\ncpu10: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
\ncpu10: package 0, core 5, smt 1
\ncpu11 at mainbus0 apid 13
\ncpu11: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
\ncpu11: package 0, core 6, smt 1
\nacpi0 at mainbus0: Intel ACPICA 20190405
\nacpi0: X\/RSDT: OemId , AslId
\nacpi0: autoconfiguration error: invalid PCI address for D01E
\nacpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
\nacpi0: SCI interrupting at int 9
\nacpi0: fixed power button present
\ntimecounter: Timecounter “ACPI-Fast” frequency 3579545 Hz quality 1000
\nhpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
\ntimecounter: Timecounter “hpet0” frequency 14318180 Hz quality 2000
\nAMDN (PNP0C01) at acpi0 not configured
\nIOMA (PNP0C02) at acpi0 not configured
\nAPSP (PNP0C02) at acpi0 not configured
\nattimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
\npcppi1 at acpi0 (SPKR, PNP0800): io 0x61
\nspkr0 at pcppi1: PC Speaker
\nwsbell at spkr0 not configured
\nmidi0 at pcppi1: PC speaker
\nsysbeep0 at pcppi1
\nSIO1 (PNP0C02) at acpi0 not configured
\npckbc1 at acpi0 (PS2K, PNP0303-0) (kbd port): io 0x60,0x64 irq 1
\nUAR1 (PNP0501) at acpi0 not configured
\nS900 (PNP0C02) at acpi0 not configured
\nacpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
\nGPIO (AMDI0030) at acpi0 not configured
\nTPM (MSFT0101) at acpi0 not configured
\nAWR0 (PNP0C02) at acpi0 not configured
\nABR0 (PNP0C02) at acpi0 not configured
\nABR1 (PNP0C02) at acpi0 not configured
\nABR2 (PNP0C02) at acpi0 not configured
\nABR3 (PNP0C02) at acpi0 not configured
\nABR4 (PNP0C02) at acpi0 not configured
\nABR5 (PNP0C02) at acpi0 not configured
\nABR6 (PNP0C02) at acpi0 not configured
\nABR7 (PNP0C02) at acpi0 not configured
\nAWR1 (PNP0C02) at acpi0 not configured
\nABR8 (PNP0C02) at acpi0 not configured
\nABR9 (PNP0C02) at acpi0 not configured
\nABRA (PNP0C02) at acpi0 not configured
\nABRB (PNP0C02) at acpi0 not configured
\nABRC (PNP0C02) at acpi0 not configured
\nABRD (PNP0C02) at acpi0 not configured
\nABRE (PNP0C02) at acpi0 not configured
\nABRF (PNP0C02) at acpi0 not configured
\nPTIO (AMDIF030) at acpi0 not configured
\nacpitz0 at acpi0 (THRM)
\nacpitz0: levels: critical 85.0 C, passive cooling
\nacpiwmi0 at acpi0 (AOD, PNP0C14-AOD): ACPI WMI Interface
\nacpiwmibus at acpiwmi0 not configured
\nACPI: Enabled 1 GPEs in block 00 to 1F
\nattimer1: attached to pcppi1
\npci0 at mainbus0 bus 0: configuration mode 1
\npci0: i\/o space, memory space enabled, rd\/line, rd\/mult, wr\/inv ok
\namdsmn0 at pci0 dev 0 function 0: AMD Family 17h System Management Network
\namdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family17h)
\nvendor 1022 product 1451 (IOMMU system) at pci0 dev 0 function 2 not configured
\npchb0 at pci0 dev 1 function 0: vendor 1022 product 1452 (rev. 0x00)
\nppb0 at pci0 dev 1 function 1: vendor 1022 product 1453 (rev. 0x00)
\nppb0: PCI Express capability version 2 x4 @ 2.5GT\/s
\npci1 at ppb0 bus 1
\npci1: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nxhci0 at pci1 dev 0 function 0: vendor 1022 product 43b9 (rev. 0x02)
\nxhci0: interrupting at msi0 vec 0
\nxhci0: xHCI version 1.10
\nusb0 at xhci0: USB revision 3.1
\nusb1 at xhci0: USB revision 2.0
\nahcisata0 at pci1 dev 0 function 1: vendor 1022 product 43b5 (rev. 0x02)
\nahcisata0: 64-bit DMA
\nahcisata0: AHCI revision 1.31, 8 ports, 32 slots, CAP 0xef36ff27
\nahcisata0: interrupting at msi1 vec 0
\natabus0 at ahcisata0 channel 0
\natabus1 at ahcisata0 channel 1
\natabus2 at ahcisata0 channel 2
\natabus3 at ahcisata0 channel 3
\natabus4 at ahcisata0 channel 4
\natabus5 at ahcisata0 channel 5
\natabus6 at ahcisata0 channel 6
\natabus7 at ahcisata0 channel 7
\nppb1 at pci1 dev 0 function 2: vendor 1022 product 43b0 (rev. 0x02)
\nppb1: PCI Express capability version 2
\npci2 at ppb1 bus 2
\npci2: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb2 at pci2 dev 0 function 0: vendor 1022 product 43b4 (rev. 0x02)
\nppb2: PCI Express capability version 2 x1 @ 5.0GT\/s
\nppb2: link is x1 @ 2.5GT\/s
\npci3 at ppb2 bus 3
\npci3: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nre0 at pci3 dev 0 function 0: RealTek 8168\/8111 PCIe Gigabit Ethernet (rev. 0x16)
\nre0: interrupting at msix2 vec 0
\nre0: Ethernet address xx:xx:xx:xx:xx:xx
\nre0: using 256 tx descriptors
\nrgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
\nrgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
\nppb3 at pci2 dev 1 function 0: vendor 1022 product 43b4 (rev. 0x02)
\nppb3: PCI Express capability version 2 x1 @ 5.0GT\/s
\nppb3: link is x1 @ 2.5GT\/s
\npci4 at ppb3 bus 4
\npci4: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb4 at pci4 dev 0 function 0: vendor 1b21 product 1080 (rev. 0x03)
\npci5 at ppb4 bus 5
\npci5: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb5 at pci2 dev 2 function 0: vendor 1022 product 43b4 (rev. 0x02)
\nppb5: PCI Express capability version 2 x1 @ 5.0GT\/s
\npci6 at ppb5 bus 6
\npci6: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb6 at pci2 dev 3 function 0: vendor 1022 product 43b4 (rev. 0x02)
\nppb6: PCI Express capability version 2 x1 @ 5.0GT\/s
\npci7 at ppb6 bus 7
\npci7: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb7 at pci2 dev 4 function 0: vendor 1022 product 43b4 (rev. 0x02)
\nppb7: PCI Express capability version 2 x2 @ 5.0GT\/s
\npci8 at ppb7 bus 8
\npci8: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nvendor 1fc9 product 4022 (ethernet network) at pci8 dev 0 function 0 not configured
\nppb8 at pci2 dev 6 function 0: vendor 1022 product 43b4 (rev. 0x02)
\nppb8: PCI Express capability version 2 x1 @ 5.0GT\/s
\npci9 at ppb8 bus 9
\npci9: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nppb9 at pci2 dev 7 function 0: vendor 1022 product 43b4 (rev. 0x02)
\nppb9: PCI Express capability version 2 x1 @ 5.0GT\/s
\nppb9: link is x1 @ 2.5GT\/s
\npci10 at ppb9 bus 10
\npci10: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nathn0 at pci10 dev 0 function 0: Atheros AR9287
\nathn0: rev 2 (2T2R), ROM rev 4, address xx:xx:xx:xx:xx:xx
\nathn0: interrupting at ioapic1 pin 3
\nathn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
\nathn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
\npchb1 at pci0 dev 2 function 0: vendor 1022 product 1452 (rev. 0x00)
\npchb2 at pci0 dev 3 function 0: vendor 1022 product 1452 (rev. 0x00)
\nppb10 at pci0 dev 3 function 1: vendor 1022 product 1453 (rev. 0x00)
\nppb10: PCI Express capability version 2 x16 @ 8.0GT\/s
\npci11 at ppb10 bus 11
\npci11: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nradeon0 at pci11 dev 0 function 0: vendor 1002 product 6811 (rev. 0x81)
\nhdaudio0 at pci11 dev 0 function 1: HD Audio Controller
\nhdaudio0: interrupting at msi3 vec 0
\nhdafg0 at hdaudio0: vendor 1002 product aa01
\nhdafg0: HDMI00 2ch: Digital Out [Jack]\nhdafg0: HDMI01 2ch: Digital Out [Jack]\nhdafg0: HDMI02 2ch: Digital Out [Jack]\nhdafg0: HDMI03 2ch: Digital Out [Jack]\nhdafg0: HDMI04 2ch: Digital Out [Jack]\nhdafg0: HDMI05 2ch: Digital Out [Jack]\nhdafg0: 2ch\/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
\npchb3 at pci0 dev 4 function 0: vendor 1022 product 1452 (rev. 0x00)
\npchb4 at pci0 dev 7 function 0: vendor 1022 product 1452 (rev. 0x00)
\nppb11 at pci0 dev 7 function 1: vendor 1022 product 1454 (rev. 0x00)
\nppb11: PCI Express capability version 2 x16 @ 8.0GT\/s
\npci12 at ppb11 bus 12
\npci12: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nvendor 1022 product 145a (non-essential instrumentation, subclass 0x00) at pci12 dev 0 function 0 not configured
\nvendor 1022 product 1456 (miscellaneous crypto) at pci12 dev 0 function 2 not configured
\nxhci1 at pci12 dev 0 function 3: vendor 1022 product 145c (rev. 0x00)
\nxhci1: interrupting at msi4 vec 0
\nxhci1: xHCI version 1.0
\nusb2 at xhci1: USB revision 3.0
\nusb3 at xhci1: USB revision 2.0
\npchb5 at pci0 dev 8 function 0: vendor 1022 product 1452 (rev. 0x00)
\nppb12 at pci0 dev 8 function 1: vendor 1022 product 1454 (rev. 0x00)
\nppb12: PCI Express capability version 2 x16 @ 8.0GT\/s
\npci13 at ppb12 bus 13
\npci13: i\/o space, memory space enabled, rd\/line, wr\/inv ok
\nvendor 1022 product 1455 (non-essential instrumentation, subclass 0x00) at pci13 dev 0 function 0 not configured
\nahcisata1 at pci13 dev 0 function 2: vendor 1022 product 7901 (rev. 0x51)
\nahcisata1: 64-bit DMA
\nahcisata1: AHCI revision 1.31, 1 port, 32 slots, CAP 0xf737ff00
\nahcisata1: interrupting at msi5 vec 0
\natabus8 at ahcisata1 channel 0
\nhdaudio1 at pci13 dev 0 function 3: HD Audio Controller
\nhdaudio1: interrupting at msi6 vec 0
\nhdafg1 at hdaudio1: vendor 10ec product 0892
\nhdafg1: DAC00 8ch: Speaker [Jack]\nhdafg1: DAC01 2ch: HP Out [Jack]\nhdafg1: DIG02 2ch: SPDIF Out [Jack]\nhdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]\nhdafg1: ADC04 2ch: Mic In [Jack]\nhdafg1: 8ch\/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
\naudio0 at hdafg1: playback, capture, full duplex, independent
\naudio0: slinear_le:16 8ch 48000Hz, blk 40ms for playback
\naudio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording
\nspkr1 at audio0: PC Speaker (synthesized)
\nwsbell at spkr1 not configured
\npiixpm0 at pci0 dev 20 function 0: vendor 1022 product 790b (rev. 0x59)
\npiixpm0: polling
\niic0 at piixpm0 port 0: I2C bus
\niic1 at piixpm0 port 1: I2C bus
\niic2 at piixpm0 port 2: I2C bus
\niic3 at piixpm0 port 3: I2C bus
\npcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. 0x51)
\npchb6 at pci0 dev 24 function 0: vendor 1022 product 1460 (rev. 0x00)
\npchb7 at pci0 dev 24 function 1: vendor 1022 product 1461 (rev. 0x00)
\npchb8 at pci0 dev 24 function 2: vendor 1022 product 1462 (rev. 0x00)
\npchb9 at pci0 dev 24 function 3: vendor 1022 product 1463 (rev. 0x00)
\npchb10 at pci0 dev 24 function 4: vendor 1022 product 1464 (rev. 0x00)
\npchb11 at pci0 dev 24 function 5: vendor 1022 product 1465 (rev. 0x00)
\npchb12 at pci0 dev 24 function 6: vendor 1022 product 1466 (rev. 0x00)
\npchb13 at pci0 dev 24 function 7: vendor 1022 product 1467 (rev. 0x00)
\nisa0 at pcib0
\ncom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
\nacpicpu0 at cpu0: ACPI CPU
\nacpicpu0: C1: FFH, lat 1 us, pow 0 mW
\nacpicpu0: C2: I\/O, lat 400 us, pow 0 mW
\nacpicpu0: P0: FFH, lat 1 us, pow 3960 mW, 3200 MHz
\nacpicpu0: P1: FFH, lat 1 us, pow 2940 mW, 2800 MHz
\nacpicpu0: P2: FFH, lat 1 us, pow 1350 mW, 1550 MHz
\nacpicpu0: T0: I\/O, lat 1 us, pow 0 mW, 100 %
\nacpicpu0: T1: I\/O, lat 1 us, pow 0 mW, 88 %
\nacpicpu0: T2: I\/O, lat 1 us, pow 0 mW, 76 %
\nacpicpu0: T3: I\/O, lat 1 us, pow 0 mW, 64 %
\nacpicpu0: T4: I\/O, lat 1 us, pow 0 mW, 52 %
\nacpicpu0: T5: I\/O, lat 1 us, pow 0 mW, 40 %
\nacpicpu0: T6: I\/O, lat 1 us, pow 0 mW, 28 %
\nacpicpu0: T7: I\/O, lat 1 us, pow 0 mW, 16 %
\nacpicpu1 at cpu1: ACPI CPU
\nacpicpu2 at cpu2: ACPI CPU
\nacpicpu3 at cpu3: ACPI CPU
\nacpicpu4 at cpu4: ACPI CPU
\nacpicpu5 at cpu5: ACPI CPU
\nacpicpu6 at cpu6: ACPI CPU
\nacpicpu7 at cpu7: ACPI CPU
\nacpicpu8 at cpu8: ACPI CPU
\nacpicpu9 at cpu9: ACPI CPU
\nacpicpu10 at cpu10: ACPI CPU
\nacpicpu11 at cpu11: ACPI CPU
\ntimecounter: Timecounter “clockinterrupt” frequency 100 Hz quality 0
\ntimecounter: Timecounter “TSC” frequency 3194380160 Hz quality 3000
\nuhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9\/0, rev 3.00\/1.00, addr 0
\nuhub0: 6 ports with 6 removable, self powered
\nuhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9\/0, rev 2.00\/1.00, addr 0
\nuhub1: 14 ports with 14 removable, self powered
\nuhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9\/0, rev 3.00\/1.00, addr 0
\nuhub2: 4 ports with 4 removable, self powered
\nuhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9\/0, rev 2.00\/1.00, addr 0
\nuhub3: 4 ports with 4 removable, self powered
\nIPsec: Initialized Security Association Processing.
\nahcisata0 port 1: device present, speed: 6.0Gb\/s
\nahcisata0 port 5: device present, speed: 3.0Gb\/s
\nautoconfiguration error: ahcisata0 port 1: clearing WDCTL_RST failed for drive 15
\nautoconfiguration error: ahcisata0 port 5: clearing WDCTL_RST failed for drive 15
\nautoconfiguration error: ahcisata0 port 1: drive 15 reset failed, disabling PMP
\nautoconfiguration error: ahcisata0 port 5: drive 15 reset failed, disabling PMP
\nahcisata0 port 1: device present, speed: 6.0Gb\/s
\nahcisata0 port 5: device present, speed: 3.0Gb\/s
\numass0 at uhub0 port 1 configuration 1 interface 0
\numass0: Western Digital (0x1058) Elements 10A8 (0x10a8), rev 3.00\/10.42, addr 1
\numass0: using SCSI over Bulk-Only
\nscsibus0 at umass0: 2 targets, 1 lun per target
\nsd0 at scsibus0 target 0 lun 0: disk fixed
\nsd0: fabricating a geometry
\nsd0: 931 GB, 953837 cyl, 64 head, 32 sec, 512 bytes\/sect x 1953458176 sectors
\nuhub4 at uhub1 port 12: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class 9\/0, rev 2.00\/32.98, addr 2
\nuhub4: single transaction translator
\nsd0: fabricating a geometry
\nuhub4: 4 ports with 4 removable, self powered
\nubt0 at uhub3 port 2
\nubt0: vendor 0a12 (0xa12) Bluetooth2.1+EDR CLASS1 (0x01), rev 2.00\/52.76, addr 1
\nwd0 at atabus1 drive 0
\nwd0:
\nwd0: drive supports 16-sector PIO transfers, LBA48 addressing
\nwd0: 476 GB, 992277 cyl, 16 head, 63 sec, 512 bytes\/sect x 1000215216 sectors
\nwd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133), WRITE DMA FUA, NCQ (32 tags)
\nwd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra\/133) (using DMA), NCQ (31 tags)
\nwd1 at atabus5 drive 0
\numass1 at uhub0 port 2 configuration 1 interface 0
\numass1: StoreJet Transcend (0x174c) StoreJet Transcend (0x5106), rev 3.00\/80.00, addr 3
\numass1: using SCSI over Bulk-Only
\nscsibus1 at umass1: 2 targets, 1 lun per target
\nsd1 at scsibus1 target 0 lun 0: disk fixed
\nsd1: 238 GB, 16383 cyl, 16 head, 63 sec, 512 bytes\/sect x 500118192 sectors
\nsd1: GPT GUID: aa426d16-0d0e-40a1-90e7-9a75f7b5c75f
\ndk0 at sd1: “67b20926-002a-424f-a169-2c7efc563bb9”, 614401 blocks at 4097, type: msdos
\ndk1 at sd1: “5d7e40e5-4454-4a98-a81e-c5223d78f161”, 421527550 blocks at 618498, type: ext2fs
\ndk2 at sd1: “ed7d719c-6ef4-451f-9732-2e4dd981273b”, 35925033 blocks at 464178417, type:
\ndk3 at sd1: “731c9349-02e0-471d-93db-99f63c06afe8”, 42032369 blocks at 422146048, type: ffs
\nuhidev0 at uhub4 port 2 configuration 1 interface 0
\nuhidev0: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2030), rev 2.00\/1.09, addr 4, iclass 3\/1
\nukbd0 at uhidev0: 8 Variable keys, 6 Array codes
\nwskbd0 at ukbd0: console keyboard
\nuhidev1 at uhub4 port 2 configuration 1 interface 1
\nuhidev1: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2030), rev 2.00\/1.09, addr 4, iclass 3\/0
\nuhid0 at uhidev1: input=4, output=0, feature=0
\nuhidev2 at uhub4 port 2 configuration 1 interface 2
\nuhidev2: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2030), rev 2.00\/1.09, addr 4, iclass 3\/0
\nukbd1 at uhidev2: 120 Variable keys, 0 Array codes
\nwskbd1 at ukbd1 mux 1
\nuhidev3 at uhub4 port 3 configuration 1 interface 0
\nuhidev3: Kensington (0x47d) Kensington USB\/PS2 Orbit (0x1022), rev 1.10\/4.00, addr 5, iclass 3\/1
\nums0 at uhidev3: 2 buttons
\nwsmouse0 at ums0 mux 0
\nautoconfiguration error: ahcisata0 port 5: clearing WDCTL_RST failed for drive 0
\nwd1: autoconfiguration error: IDENTIFY failed
\nwd1: fixing 0 sector size
\nwd1: secperunit and ncylinders are zero
\nwd1(ahcisata0:5:0): using PIO mode 0
\nWARNING: 7 errors while detecting hardware; check system log.
\nboot device: wd0
\nroot on wd0a dumps on wd0b
\nroot file system type: ffs
\nkern.module.path=\/stand\/amd64\/9.0\/modules
\nkern info: [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6811 0x1458:0x2015).
\nkern info: [drm] register mmio base: 0xfcf00000
\nkern info: [drm] register mmio size: 262144
\nkern info: ATOM BIOS: GV
\nradeon0: info: VRAM: 2048M 0x0000000000000000 – 0x000000007FFFFFFF (2048M used)
\nradeon0: info: GTT: 2048M 0x0000000080000000 – 0x00000000FFFFFFFF
\nkern info: [drm] Detected VRAM RAM=800M, BAR=256M
\nkern info: [drm] RAM width 256bits DDR
\nZone kernel: Available graphics memory: 11320714 kiB
\nZone dma32: Available graphics memory: 2097152 kiB
\nkern info: [drm] radeon: 2048M of VRAM memory ready
\nkern info: [drm] radeon: 2048M of GTT memory ready.
\nkern info: [drm] Loading pitcairn Microcode
\nkern info: [drm] radeon\/PITCAIRN_mc2.bin: 31100 bytes
\nkern info: [drm] Internal thermal controller with fan control
\nkern info: [drm] radeon: dpm initialized
\nradeon0: autoconfiguration error: error: radeon_vce: Can’t load firmware “radeon\/TAHITI_vce.bin”
\nkern info: [drm] GART: num cpu pages 524288, num gpu pages 524288
\nkern info: [drm] PCIE GART of 2048M enabled (table at 0x0000000000277000).
\nradeon0: info: WB enabled
\nradeon0: info: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x0xffff91992157cc00
\nradeon0: info: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x0xffff91992157cc04
\nradeon0: info: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0xffff91992157cc08
\nradeon0: info: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x0xffff91992157cc0c
\nradeon0: info: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x0xffff91992157cc10
\nradeon0: info: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x0xffffd9825ae75a18
\nradeon0: autoconfiguration error: error: VCE init error (-22).
\nkern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
\nkern info: [drm] Driver supports precise vblank timestamp query.
\nradeon0: info: radeon: MSI limited to 32-bit
\nradeon0: interrupting at ioapic1 pin 30 (radeon0)
\nkern info: [drm] radeon: irq initialized.
\nkern info: [drm] ring test on 0 succeeded in 2 usecs
\nkern info: [drm] ring test on 1 succeeded in 1 usecs
\nkern info: [drm] ring test on 2 succeeded in 1 usecs
\nkern info: [drm] ring test on 3 succeeded in 5 usecs
\nkern info: [drm] ring test on 4 succeeded in 5 usecs
\nkern info: [drm] ring test on 5 succeeded in 2 usecs
\nkern info: [drm] UVD initialized successfully.
\nkern info: [drm] ib test on ring 0 succeeded in 0 usecs
\nkern info: [drm] ib test on ring 1 succeeded in 0 usecs
\nkern info: [drm] ib test on ring 2 succeeded in 0 usecs
\nkern info: [drm] ib test on ring 3 succeeded in 0 usecs
\nkern info: [drm] ib test on ring 4 succeeded in 0 usecs
\nkern info: [drm] ib test on ring 5 succeeded
\nkern info: [drm] Radeon Display Connectors
\nkern info: [drm] Connector 0:
\nkern info: [drm] DP-1
\nkern info: [drm] HPD4
\nkern info: [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
\nkern info: [drm] Encoders:
\nkern info: [drm] DFP1: INTERNAL_UNIPHY2
\nkern info: [drm] Connector 1:
\nkern info: [drm] HDMI-A-1
\nkern info: [drm] HPD5
\nkern info: [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
\nkern info: [drm] Encoders:
\nkern info: [drm] DFP2: INTERNAL_UNIPHY2
\nkern info: [drm] Connector 2:
\nkern info: [drm] DVI-I-1
\nkern info: [drm] HPD6
\nkern info: [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
\nkern info: [drm] Encoders:
\nkern info: [drm] DFP3: INTERNAL_UNIPHY
\nkern info: [drm] CRT1: INTERNAL_KLDSCP_DAC1
\nkern info: [drm] Connector 3:
\nkern info: [drm] DVI-D-1
\nkern info: [drm] HPD1
\nkern info: [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
\nkern info: [drm] Encoders:
\nkern info: [drm] DFP4: INTERNAL_UNIPHY1
\nradeondrmkmsfb0 at radeon0
\nradeondrmkmsfb0: framebuffer at 0xffffd9825b8b6000, size 1920×1080, depth 32, stride 7680
\nwsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
\nwsmux1: connecting to wsdisplay0
\nwskbd1: connecting to wsdisplay0
\nwsdisplay0: screen 1 added (default, vt100 emulation)
\nwsdisplay0: screen 2 added (default, vt100 emulation)
\nwsdisplay0: screen 3 added (default, vt100 emulation)
\nwsdisplay0: screen 4 added (default, vt100 emulation)
\n<\/div>\n\n\n\n

<\/p>\n","protected":false},"excerpt":{"rendered":"

At the end of July I decided to downgrade my graphics card from Radeon RX 460 to Radeon R7 370 (which is performance wise similar card) for better NetBSD compatibility and ability to build NetBSD desktop. It almost coincided with the creation of NetBSD 9 branch which should serve the basis of my desktop system … Continue reading Updated to NetBSD 9 branch<\/span> →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[],"class_list":["post-391","post","type-post","status-publish","format-standard","hentry","category-netbsd"],"_links":{"self":[{"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/posts\/391","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/netbsd.name\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=391"}],"version-history":[{"count":1,"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/posts\/391\/revisions"}],"predecessor-version":[{"id":392,"href":"https:\/\/netbsd.name\/index.php?rest_route=\/wp\/v2\/posts\/391\/revisions\/392"}],"wp:attachment":[{"href":"https:\/\/netbsd.name\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=391"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/netbsd.name\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=391"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/netbsd.name\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=391"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}