Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.

NetBSD 7.1_RC1 (GENERIC.201701060741Z)
total memory = 957 MB
avail memory = 924 MB
kern.module.path=/stand/i386/7.1/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter “i8254” frequency 1193182 Hz quality 100
VIA Technologies, Inc. CN400-8237 ( )
mainbus0 (root)
ACPI: RSDP 0xf8940 000014 (v00 CN400 )
ACPI: RSDT 0x3bde3040 00002C (v01 CN400  AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0x3bde30c0 000074 (v01 CN400  AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0x3bde3180 004D8C (v01 CN400  AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 0x3bde0000 000040
ACPI: APIC 0x3bde7f80 000068 (v01 CN400  AWRDACPI 42302E31 AWRD 00000000)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x3, 24 pins
cpu0 at mainbus0 apid 0: VIA Nehemiah, id 0x69a
cpu1 at mainbus0 apid 1: VIA Nehemiah, id 0x69a
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <CN400 ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter “ACPI-Fast” frequency 3579545 Hz quality 1000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEM (PNP0C01) at acpi0 not configured
PMIO (PNP0C02) at acpi0 not configured
SYSR (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COPR (PNP0C04) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
acpitz0 at acpi0 (THRM): cpu0
acpitz0: active cooling level 0: 100.0C
acpitz0: levels: critical 100.0 C, passive 100.0 C
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 1 GPEs in block 00 to 0F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1106 product 0x0259 (rev. 0x00)
agp0 at pchb0: aperture at 0xe8000000, size 0x8000000
pchb1 at pci0 dev 0 function 1: vendor 0x1106 product 0x1259 (rev. 0x00)
pchb2 at pci0 dev 0 function 2: vendor 0x1106 product 0x2259 (rev. 0x00)
pchb3 at pci0 dev 0 function 3: vendor 0x1106 product 0x3259 (rev. 0x00)
pchb4 at pci0 dev 0 function 4: vendor 0x1106 product 0x4259 (rev. 0x00)
pchb5 at pci0 dev 0 function 7: vendor 0x1106 product 0x7259 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb198 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x1106 product 0x3118 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80×25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
fxp0 at pci0 dev 9 function 0: i82551 Ethernet (rev. 0x10)
fxp0: interrupting at ioapic0 pin 17
fxp0: Ethernet address
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vge0 at pci0 dev 10 function 0: VIA VT612X Gigabit Ethernet (rev. 0x11)
vge0: interrupting at ioapic0 pin 18
vge0: Ethernet address:
ciphy0 at vge0 phy 1: Cicada CS8201 10/100/1000TX PHY, rev. 2
ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pci_mem_find: expected type mem, found i/o
viaide0 at pci0 dev 15 function 0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 20 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel ignored (disabled)
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci0: interrupting at ioapic0 pin 21
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci3: interrupting at ioapic0 pin 21
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x86)
ehci0: interrupting at ioapic0 pin 21
ehci0: dropped intr workaround enabled
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
viapcib0 at pci0 dev 17 function 0: vendor 0x1106 product 0x3227 (rev. 0x00)
viapcib0: SMBus found at 0x500 (revision 0x0)
iic0 at viapcib0: I2C bus
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC’97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22
auvia0: ac97: VIA Technologies VT1616i codec; headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
auvia0: ac97: ext id 0x1c1<LDAC,SDAC,CDAC,VRA>
audio0 at auvia0: full duplex, playback, capture, mmap, independent
vr0 at pci0 dev 18 function 0: vendor 0x1106 product 0x3065 (rev. 0x78)
vr0: interrupting at ioapic0 pin 23
vr0: Ethernet address:
ukphy0 at vr0 phy 1: OUI 0x0002c6, model 0x0032, rev. 10
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at viapcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter “clockinterrupt” frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viaide0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <SAMSUNG HD160JJ>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310098 cyl, 16 head, 63 sec, 512 bytes/sect x 312579695 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
umass0 at uhub4 port 4 configuration 1 interface 0
umass0: Lexar USB Flash Drive, rev 2.00/11.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Lexar, USB Flash Drive, 1100> disk removable
sd0: 7645 MB, 1023 cyl, 255 head, 63 sec, 512 bytes/sect x 15656960 sectors
Kernelized RAIDframe activated
match_bootwedge: unable to read block 20964826 of dev sd0 (22)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: USB USB Keykoard, rev 1.10/1.10, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: USB USB Keykoard, rev 1.10/1.10, addr 2, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
wsdisplay0: screen 1 added (80×25, vt100 emulation)
wsdisplay0: screen 2 added (80×25, vt100 emulation)
wsdisplay0: screen 3 added (80×25, vt100 emulation)
wsdisplay0: screen 4 added (80×25, vt100 emulation)