NetBSD 8.0 RC1 dmesg

I have updated my setup to 8.0 RC1, so I am sharing dmesg with you. Currently my primary computer is based on Ryzen 5 1600 CPU and Biostar X370 GT5 motherboard.  Everything except X sets was compiled from source (including packages as I am using pkgsrc).  Kernel was compiled from unmodified GENERIC configuration. Graphics card (Radeon RX460) doesn’t seem supported yet, therefore using Xorg is a limited experience.

NetBSD 8.0 RC1 on Ryzen 5 1600

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

NetBSD 8.0_RC1 (GENERIC) #1: Fri Apr 27 19:06:59 UTC 2018
andrius@localhost:/home/andrius/netbsd-src/sys/arch/amd64/compile/GENERIC
total memory = 32721 MB
avail memory = 31748 MB
cpu_rng: RDSEED
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter “i8254” frequency 1193182 Hz quality 100
BIOSTAR Group X370GT5 ( )
mainbus0 (root)
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DC1470A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DC14CA58 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-693)
ACPI: DSDT 0x00000000DC1471F0 005862 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DC516E00 000040
ACPI: APIC 0x00000000DC14CB70 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DC14CC50 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DC14CC98 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DC14CD38 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DC155988 002B35 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DC1584C0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: BHMB 0x00000000DC158500 000474 (v01 ALASKA A M I 00000001 AMI 00000001)
ACPI: SSDT 0x00000000DC158978 001A58 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DC15A3D0 000BD0 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DC15AFA0 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: HPET 0x00000000DC15AFD0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DC15B008 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DC15B030 000042 (v01 00000000 00000000)
ACPI: TPM2 0x00000000DC15B078 000034 (v03 ALASKA A M I 00000001 AMI 00000000)
ACPI: IVRS 0x00000000DC15B0B0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DC15B180 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x00000000DC15B278 00195E (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: WSMT 0x00000000DC15CBD8 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 7 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 13: pa 0xfec00000, version 0x21, 24 pins
ioapic1 at mainbus0 apid 14: pa 0xfec01000, version 0x21, 32 pins
cpu0 at mainbus0 apid 0
cpu0: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
cpu1: package 0, core 0, smt 1
cpu2 at mainbus0 apid 2
cpu2: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
cpu2: package 0, core 1, smt 0
cpu3 at mainbus0 apid 3
cpu3: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
cpu3: package 0, core 1, smt 1
cpu4 at mainbus0 apid 4
cpu4: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
cpu4: package 0, core 2, smt 0
cpu5 at mainbus0 apid 5
cpu5: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
cpu5: package 0, core 2, smt 1
cpu6 at mainbus0 apid 8
cpu6: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
cpu6: package 0, core 4, smt 0
cpu7 at mainbus0 apid 9
cpu7: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
cpu7: package 0, core 4, smt 1
cpu8 at mainbus0 apid 10
cpu8: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
cpu8: package 0, core 5, smt 0
cpu9 at mainbus0 apid 11
cpu9: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
cpu9: package 0, core 5, smt 1
cpu10 at mainbus0 apid 12
cpu10: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
cpu10: package 0, core 6, smt 0
cpu11 at mainbus0 apid 13
cpu11: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
cpu11: package 0, core 6, smt 1
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,00010013>
acpi0: invalid PCI address for D01A
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
acpi0: SCI interrupting at int 9
timecounter: Timecounter “ACPI-Fast” frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter “hpet0” frequency 14318180 Hz quality 2000
AMDN (PNP0C01) at acpi0 not configured
UMEM (PNP0C02) at acpi0 not configured
APSP (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
SIO1 (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303-0) (kbd port): io 0x60,0x64 irq 1
UAR1 (PNP0501) at acpi0 not configured
S900 (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
GPIO (AMDI0030) at acpi0 not configured
TPM (MSFT0101) at acpi0 not configured
AWR0 (PNP0C02) at acpi0 not configured
ABR0 (PNP0C02) at acpi0 not configured
ABR1 (PNP0C02) at acpi0 not configured
ABR2 (PNP0C02) at acpi0 not configured
ABR3 (PNP0C02) at acpi0 not configured
ABR4 (PNP0C02) at acpi0 not configured
ABR5 (PNP0C02) at acpi0 not configured
ABR6 (PNP0C02) at acpi0 not configured
ABR7 (PNP0C02) at acpi0 not configured
AWR1 (PNP0C02) at acpi0 not configured
ABR8 (PNP0C02) at acpi0 not configured
ABR9 (PNP0C02) at acpi0 not configured
ABRA (PNP0C02) at acpi0 not configured
ABRB (PNP0C02) at acpi0 not configured
ABRC (PNP0C02) at acpi0 not configured
ABRD (PNP0C02) at acpi0 not configured
ABRE (PNP0C02) at acpi0 not configured
ABRF (PNP0C02) at acpi0 not configured
PTIO (AMDIF030) at acpi0 not configured
acpitz0 at acpi0 (THRM)
acpitz0: levels: critical 127.0 C, passive cooling
acpiwmi0 at acpi0 (AOD, PNP0C14-AOD): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
ACPI: Enabled 1 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
amdsmn0 at pci0 dev 0 function 0: AMD Family 17h System Management Network
amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family17h)
vendor 1022 product 1451 (IOMMU system) at pci0 dev 0 function 2 not configured
pchb0 at pci0 dev 1 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb0 at pci0 dev 1 function 1: vendor 1022 product 1453 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci1 dev 0 function 0: vendor 1022 product 43b9 (rev. 0x02)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.10 not known to be supported
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ahcisata0 at pci1 dev 0 function 1: vendor 1022 product 43b5 (rev. 0x02)
ahcisata0: interrupting at ioapic1 pin 1
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 8 ports, 32 slots, CAP 0xef36ff27<SXS,PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
atabus6 at ahcisata0 channel 6
atabus7 at ahcisata0 channel 7
ppb1 at pci1 dev 0 function 2: vendor 1022 product 43b0 (rev. 0x02)
ppb1: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb2: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x16)
re0: interrupting at msi1 vec 0
re0: Ethernet address
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb3 at pci2 dev 1 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb3: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci4 dev 0 function 0: vendor 1b21 product 1080 (rev. 0x03)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci2 dev 2 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb5: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci2 dev 3 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb6: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci2 dev 4 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb7: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x2 @ 5.0GT/s
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci2 dev 6 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb8: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci2 dev 7 function 0: vendor 1022 product 43b4 (rev. 0x02)
ppb9: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
ppb9: link is x1 @ 2.5GT/s
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
athn0 at pci10 dev 0 function 0: Atheros AR9287
athn0: rev 2 (2T2R), ROM rev 4, address
athn0: interrupting at ioapic1 pin 3
athn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
athn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
pchb1 at pci0 dev 2 function 0: vendor 1022 product 1452 (rev. 0x00)
pchb2 at pci0 dev 3 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb10 at pci0 dev 3 function 1: vendor 1022 product 1453 (rev. 0x00)
ppb10: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
ppb10: link is x8 @ 8.0GT/s
pci11 at ppb10 bus 11
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci11 dev 0 function 0: vendor 1002 product 67ef (rev. 0xcf)
wsdisplay0 at vga0 kbdmux 1: console (80×25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci11 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at msi2 vec 0
hdafg0 at hdaudio0: vendor 1002 product aa01
hdafg0: HDMI00 2ch: Digital Out [Jack] hdafg0: HDMI01 2ch: Digital Out [Jack] hdafg0: HDMI02 2ch: Digital Out [Jack] hdafg0: HDMI03 2ch: Digital Out [Jack] hdafg0: HDMI04 2ch: Digital Out [Jack] hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
pchb3 at pci0 dev 4 function 0: vendor 1022 product 1452 (rev. 0x00)
pchb4 at pci0 dev 7 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb11 at pci0 dev 7 function 1: vendor 1022 product 1454 (rev. 0x00)
ppb11: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci12 at ppb11 bus 12
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 1022 product 145a (non-essential instrumentation, subclass 0x00) at pci12 dev 0 function 0 not configured
vendor 1022 product 1456 (miscellaneous crypto) at pci12 dev 0 function 2 not configured
xhci1 at pci12 dev 0 function 3: vendor 1022 product 145c (rev. 0x00)
xhci1: interrupting at msi3 vec 0
xhci1: xHCI version 1.0
usb2 at xhci1: USB revision 3.0
usb3 at xhci1: USB revision 2.0
pchb5 at pci0 dev 8 function 0: vendor 1022 product 1452 (rev. 0x00)
ppb12 at pci0 dev 8 function 1: vendor 1022 product 1454 (rev. 0x00)
ppb12: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci13 at ppb12 bus 13
pci13: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 1022 product 1455 (non-essential instrumentation, subclass 0x00) at pci13 dev 0 function 0 not configured
ahcisata1 at pci13 dev 0 function 2: vendor 1022 product 7901 (rev. 0x51)
ahcisata1: interrupting at ioapic1 pin 18
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.31, 8 ports, 32 slots, CAP 0xf737ff07<PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus8 at ahcisata1 channel 0
atabus9 at ahcisata1 channel 1
atabus10 at ahcisata1 channel 2
atabus11 at ahcisata1 channel 3
atabus12 at ahcisata1 channel 4
atabus13 at ahcisata1 channel 5
atabus14 at ahcisata1 channel 6
atabus15 at ahcisata1 channel 7
hdaudio1 at pci13 dev 0 function 3: HD Audio Controller
hdaudio1: interrupting at msi4 vec 0
hdafg1 at hdaudio1: vendor 10ec product 0892
hdafg1: DAC00 8ch: Speaker [Jack] hdafg1: DAC01 2ch: HP Out [Jack] hdafg1: DIG02 2ch: SPDIF Out [Jack] hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack] hdafg1: ADC04 2ch: Mic In [Jack] hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
hdafg1: Virtual format configured – Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg1: Latency: 128 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
vendor 1022 product 790b (SMBus serial bus, revision 0x59) at pci0 dev 20 function 0 not configured
pcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. 0x51)
pchb6 at pci0 dev 24 function 0: vendor 1022 product 1460 (rev. 0x00)
pchb7 at pci0 dev 24 function 1: vendor 1022 product 1461 (rev. 0x00)
pchb8 at pci0 dev 24 function 2: vendor 1022 product 1462 (rev. 0x00)
pchb9 at pci0 dev 24 function 3: vendor 1022 product 1463 (rev. 0x00)
pchb10 at pci0 dev 24 function 4: vendor 1022 product 1464 (rev. 0x00)
pchb11 at pci0 dev 24 function 5: vendor 1022 product 1465 (rev. 0x00)
pchb12 at pci0 dev 24 function 6: vendor 1022 product 1466 (rev. 0x00)
pchb13 at pci0 dev 24 function 7: vendor 1022 product 1467 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 0 mW
acpicpu0: C2: I/O, lat 400 us, pow 0 mW
acpicpu0: P0: FFH, lat 1 us, pow 3960 mW, 3200 MHz
acpicpu0: P1: FFH, lat 1 us, pow 2940 mW, 2800 MHz
acpicpu0: P2: FFH, lat 1 us, pow 1350 mW, 1550 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
acpicpu8 at cpu8: ACPI CPU
acpicpu9 at cpu9: ACPI CPU
acpicpu10 at cpu10: ACPI CPU
acpicpu11 at cpu11: ACPI CPU
timecounter: Timecounter “clockinterrupt” frequency 100 Hz quality 0
ERROR: 336 cycle TSC drift observed
uhub0 at usb0: vendor 1022 (0x1022) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: vendor 1022 (0x1022) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 14 ports with 14 removable, self powered
uhub2 at usb2: vendor 1022 (0x1022) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 1022 (0x1022) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub3: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 5: device present, speed: 3.0Gb/s
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Western Digital (0x1058) Elements 10A8 (0x10a8), rev 3.00/10.42, addr 1
umass0: using SCSI over Bulk-Only
wd0 at atabus5 drive 0
wd0: <SAMSUNG HD161HJ>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <WD, Elements 10A8, 1042> disk fixed
sd0: fabricating a geometry
sd0: 931 GB, 953837 cyl, 64 head, 32 sec, 512 bytes/sect x 1953458176 sectors
uhub4 at uhub1 port 2: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class 9/0, rev 2.00/9.01, addr 2
uhub4: single transaction translator
sd0: fabricating a geometry
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd0(ahcisata0:5:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub4: 4 ports with 4 removable, self powered
ubt0 at uhub3 port 2
ubt0: vendor 0a12 (0xa12) Bluetooth2.1+EDR CLASS1 (0x01), rev 2.00/52.76, addr 1
umass1 at uhub0 port 2 configuration 1 interface 0
umass1: StoreJet Transcend (0x174c) StoreJet Transcend (0x5106), rev 3.00/80.00, addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <StoreJet, Transcend, 0> disk fixed
sd1: 238 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
sd1: GPT GUID: aa426d16-0d0e-40a1-90e7-9a75f7b5c75f
dk0 at sd1: “67b20926-002a-424f-a169-2c7efc563bb9”, 614401 blocks at 4097, type: msdos
dk1 at sd1: “5d7e40e5-4454-4a98-a81e-c5223d78f161”, 421527550 blocks at 618498, type: <unknown>
dk2 at sd1: “ed7d719c-6ef4-451f-9732-2e4dd981273b”, 35925033 blocks at 464178417, type: <unknown>
dk3 at sd1: “731c9349-02e0-471d-93db-99f63c06afe8”, 42032369 blocks at 422146048, type: ffs
uhidev0 at uhub4 port 2 configuration 1 interface 0
uhidev0: Kensington (0x47d) Kensington USB/PS2 Orbit (0x1022), rev 1.10/4.00, addr 4, iclass 3/1
ums0 at uhidev0: 2 buttons
wsmouse0 at ums0 mux 0
uhidev1 at uhub4 port 3 configuration 1 interface 0
uhidev1: USB (0x1c4f) USB Keykoard (0x02), rev 1.10/1.10, addr 5, iclass 3/1
ukbd0 at uhidev1
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub4 port 3 configuration 1 interface 1
uhidev2: USB (0x1c4f) USB Keykoard (0x02), rev 1.10/1.10, addr 5, iclass 3/0
uhidev2: 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
umass2 at uhub1 port 12 configuration 1 interface 0
umass2: Lexar (0x5dc) USB Flash Drive (0xa81d), rev 2.00/11.00, addr 6
umass2: using SCSI over Bulk-Only
scsibus2 at umass2: 2 targets, 1 lun per target
sd2 at scsibus2 target 0 lun 0: <Lexar, USB Flash Drive, 1100> disk removable
sd2: 7645 MB, 1023 cyl, 255 head, 63 sec, 512 bytes/sect x 15656960 sectors
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture, mmap
pad0: Virtual format configured – Format SLINEAR, precision 16, channels 2, frequency 44100
pad0: Latency: 139 milliseconds
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 2 errors while detecting hardware; check system log.
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.0/modules
wsdisplay0: screen 1 added (80×25, vt100 emulation)
wsdisplay0: screen 2 added (80×25, vt100 emulation)
wsdisplay0: screen 3 added (80×25, vt100 emulation)
wsdisplay0: screen 4 added (80×25, vt100 emulation)